field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

Safair Operations, operating as FlySafair has a vacancy for a Certified Aviation Technician (Avionics) - Flight Line at our Cape Town base. The successful applicant will report to the Crew Chief – Flight Line.

<h5>Job Description</h5>

<ul>
	<li>Conduct line maintenance inspections;</li>
	<li>Conduct routine inspections on various mechanical systems on the aircraft;</li>
	<li>Conduct fault finding and rectify based on the fault.</li>
	<li>Perform Line transit, Pre-Flight including weekly service checks;</li>
	<li>Perform thorough daily inspections of the aircraft to identify any potential issues or defects;</li>
	<li>Conduct necessary maintenance tasks to ensure the airworthiness of the aircraft;</li>
	<li>Adhere to established maintenance procedures and safety standards;</li>
	<li>All activities must be properly recorded and signed off as per SACAA requirements ensuring that all the required legal aspects are complied with;</li>
	<li>Health and Safety requirements must always be complied with to ensure Personal and other Personnel Safety, Fire and Accident/Incident preventions;</li>
	<li>Ensure that the work area, equipment, and tooling are properly maintained and safe prior to starting any job to prevent accidents or incidents to aircraft and staff;</li>
	<li>Maintain the highest quality and standard of inspections;</li>
	<li>Apply analytical thinking and troubleshooting techniques to identify root causes and implement effective solutions;</li>
	<li>Communicate clearly and professionally to ensure smooth workflow and timely completion of maintenance tasks.</li>
</ul>

<h5>Job Requirements</h5>

<ul>
	<li>Grade 12 or Equivalent;</li>
	<li>Licensed AME with a SACAA W1, W2, W3 License (Essential);</li>
	<li>Compass Swing (Advantageous);</li>
	<li>Completed B737 – 400 and 800 Avionics and airframe series and CFM 56-3C1 and -7B series engines courses;</li>
	<li>Licensed AME with a SACAA W &amp; X License;</li>
	<li>Certified on B737; 400/800 airframe series and CFM;</li>
	<li>Minimum of 5 years aviation experience;</li>
	<li>Line or SVM experience;</li>
	<li>Previous experience working on B737; 400 and 800 (Essential) 56-3C1 and 7B series engines;</li>
	<li>Willingness to work shifts, weekends and on public holidays;</li>
	<li>Must be available and willing to travel at short notice, both locally and internationally;</li>
	<li>Valid South-African passport holder;</li>
	<li>Proficient in the use of Microsoft Office (Word, Excel and Outlook, PowerPoint);</li>
	<li>Sound understanding of technical aircraft publications and documentation;</li>
	<li>Maintain a thorough understanding of aviation regulations and safety standards;</li>
	<li>Good understanding of the Avionics Schematic systems;</li>
	<li>Excellent knowledge and troubleshooting experience on B737/400/800.</li>
</ul>

Personal Attributes:

<ul>
	<li>Analytical thinking;</li>
	<li>Strong communication skills;</li>
	<li>Excellent time-keeping;</li>
	<li>Able to follow instructions as per work instructions;</li>
	<li>Detail orientated; - Professional;</li>
	<li>High integrity;</li>
	<li>Self-disciplined;</li>
	<li>Ethical;</li>
	<li>Reliable and dependable;</li>
	<li>Proactive self-starter, capable of functioning on his/her own without any supervision;</li>
	<li>Committed to delivering quality work.</li>
</ul>

Application guideline:

<ul>
	<li>Email applications will not be accepted;</li>
	<li>Preference will be given to members of under-represented designated groups;</li>
	<li>Should no feedback be provided within two (2) weeks from the closing date, please consider your application as unsuccessful.</li>
</ul>

Certified Aviation Technician: Avionics

Safair Operations, operating as FlySafair has a vacancy for a Senior Certified Aviation Technician (Avionics) - Flight Line at our Cape Town base. The successful applicant will report to the Crew Chief – Flight Line.

<h5>Job Description</h5>

<ul>
	<li>Conduct line maintenance inspections;</li>
	<li>Ensure quality is in on Pre-Flight, Post Flight and Transit inspections performed;</li>
	<li>Performing routine and non-routine inspections and maintenance on aircraft to ensure they meet the highest safety and operational standards;</li>
	<li>Conduct routine inspections on various avionics systems on the aircraft;</li>
	<li>Conduct fault finding and rectify based on the fault;</li>
	<li>Perform thorough daily inspections of the aircraft to identify any potential issues or defects;</li>
	<li>Conduct necessary maintenance tasks to ensure the airworthiness of the aircraft;</li>
	<li>Adhere to established maintenance procedures and safety standards;</li>
	<li>All activities must be properly recorded and signed off as per SACAA requirements ensuring that all the required legal aspects are complied with;</li>
	<li>Health and Safety requirements must always be complied with to ensure Personal and other Personnel Safety, Fire and Accident/Incident preventions;</li>
	<li>Ensure that the work area, equipment, and tooling are properly maintained and safe prior to starting any job to prevent accidents or incidents to aircraft and staff;</li>
	<li>Maintain the highest quality and standard of inspections;</li>
	<li>Apply analytical thinking and troubleshooting techniques to identify root causes and implement effective solutions;</li>
	<li>Communicate clearly and professionally to ensure smooth workflow and timely completion of maintenance tasks.</li>
</ul>

<h5>Job Requirements</h5>

<ul>
	<li>Grade 12 or equivalent;</li>
	<li>Licensed AME with a SACAA W1, W2, W3 license on B738 -400/ -800 (Essential);</li>
	<li>Compass Swing (Advantageous);</li>
	<li>Minimum of 15 years aviation experience;</li>
	<li>Line and SVM experience;</li>
	<li>Previous experience working on B737-400 and -800;</li>
	<li>Willingness to work shifts, weekends and on public holidays;</li>
	<li>Must be available and willing to travel at short notice, both locally and internationally;</li>
	<li>Valid South-African passport holder;</li>
	<li>Sound understanding of technical aircraft publications and documentation;</li>
	<li>Maintain a thorough understanding of aviation regulations and safety standards;</li>
	<li>Good understanding of the Avionics Schematic systems;</li>
	<li>Excellent knowledge and troubleshooting experience on B737/400/800;</li>
	<li>Proficient in the use of Microsoft Office (Word, Excel, PowerPoint and Outlook.</li>
</ul>

Personal Attributes:

<ul>
	<li>Professional;</li>
	<li>High Integrity;</li>
	<li>Self-disciplined;</li>
	<li>Ethical;</li>
	<li>Reliable and dependable;</li>
	<li>Proactive self-starter’ capable of functioning on his/her own with any supervision;</li>
	<li>Committed to delivering quality work;</li>
	<li>Excellent time-keeping;</li>
	<li>Analytical thinking;</li>
	<li>Strong communication skills;</li>
	<li>Able to follow instructions per work instructions;</li>
	<li>Detail-orientated.</li>
</ul>

Application guideline:

<ul>
	<li>Email applications will not be accepted;</li>
	<li>Preference will be given to members of under-represented designated groups;</li>
	<li>Should no feedback be provided within two (2) weeks from the closing date, please consider your application as unsuccessful.</li>
</ul>

Senior Certified Aviation Technician (Avionics) - Flight Line

Safair Operations, operating as FlySafair, has a vacancies for Flight Attendants based at O.R Tambo International Airport and Lanseria International Airport . The successful application will report to the Cabin Services Manager.

<h5>Job Description</h5>

Responsibilities

<ul>
	<li>Continuously ensure compliance to applicable safety policies and procedures;</li>
	<li>Ensure the efficient execution of all activities relating to a positive passenger experience;</li>
	<li>Continuously promote a high level of integrity;</li>
	<li>Ensure a high standard of administrative compliance.</li>
</ul>

<h5>Job Requirements</h5>

<ul>
	<li>Grade 12 or equivalent;</li>
	<li>Current and Valid (non-negotiable):
	<ul>
		<li>SACAA Cabin Crew License;</li>
		<li>Avmed DD50 Medical Certificate;</li>
		<li>Dangerous Goods Certificate;</li>
		<li>Ditching Certificate;</li>
		<li>Fire Fighting Certificate;</li>
	</ul>
	</li>
	<li>Valid SA driver’s license and own motor vehicle (non-negotiable);</li>
	<li>Level 4 English language proficiency;</li>
	<li>Medically fit and able to swim;</li>
	<li>Willingness to work shifts, weekends and on public holidays. This includes early morning sign-on’s or late evening sign-offs.</li>
</ul>

Application Guideline:

<ul>
	<li>Email applications will not be accepted;</li>
	<li>Preference will be given to members of under-represented designated groups;</li>
	<li>Should no feedback be provided within two (2) weeks from the closing date, please consider your application as unsuccessful.</li>
</ul>

Flight Attendant

Safair Operations, operating as FlySafair has a vacancy for a Master Aviation Technician (Mechanical) — Heavy Maintenance at our Head Office. The successful applicant will report to the Crew Chief: Mechanical.

<h5>Job Description</h5>

<ul>
	<li>Ensure Quality is built in on Pre-Flight, Post Flight and Transit inspections performed;</li>
	<li>Perform routine and non-routine inspections and maintenance on aircraft to ensure they meet the highest safety and operational standards;</li>
	<li>Conduct routine inspections on various mechanical systems on the aircraft;</li>
	<li>Conduct fault finding and rectify based on the fault. Perform thorough daily inspections of the aircraft to identify any potential issues or defects;</li>
	<li>Conduct necessary maintenance tasks to ensure the airworthiness of the aircraft;</li>
	<li>Adhere to established maintenance procedures and safety standards;</li>
	<li>All activities must be properly recorded and signed off as per SACCA requirements ensuring that all the required legal aspects are complied with;</li>
	<li>Health and safety requirements must always be followed to ensure personal safety, the safety of others, and to prevent fires, accidents, and incidents;</li>
	<li>Ensure that the work area, equipment, and tooling are properly maintained and safe prior to starting any job to prevent accidents or incidents to aircraft and staff;</li>
	<li>Maintain the highest quality and standard of inspections;</li>
	<li>Apply analytical thinking and troubleshooting techniques to identify root causes and implement effective solutions;</li>
	<li>Communicate clearly and professionally to ensure smooth workflow and timely completion of maintenance tasks.</li>
</ul>

<h5>Job Requirements</h5>

<ul>
	<li>Grade 12 or Equivalent (Essential);</li>
	<li>Licensed AME with a SACAA A License on B737 —400 and -800 (Advantageous);</li>
	<li>Licensed AME with a SACAA C license on CFM 56-3 and -7B series engines (Advantageous);</li>
	<li>Minimum of 15 years aviation experience (Essential) Experience on GTCP131-9 and GTCP85-129 APU's.;</li>
	<li>Heavy Maintenance experience;</li>
	<li>Previous experience working on B737-400 and 800;</li>
	<li>Willingness to work shifts, weekends and on public holidays;</li>
	<li>Must be available and willing to travel at short notice, both locally and internationally;</li>
	<li>Valid South-African passport holder;</li>
	<li>Sound understanding of technical aircraft publications and documentation;</li>
	<li>Sound understanding of B737-400 and B737-800 mechanical systems;</li>
	<li>Understanding of SACAR's as applicable to maintenance;</li>
	<li>Maintain a thorough understanding of aviation regulations and safety standards;</li>
	<li>Excellent knowledge and troubleshooting experience on B737/400/800.</li>
</ul>

Personal Attributes:

<ul>
	<li>Professional;</li>
	<li>High integrity Self-disciplined;</li>
	<li>Ethical;</li>
	<li>Reliable and dependable;</li>
	<li>Proactive self-starter, capable of functioning on his/her own without any supervision;</li>
	<li>Committed to delivering quality work;</li>
	<li>Analytical thinking;</li>
	<li>Strong communication skills;</li>
	<li>Excellent time-keeping;</li>
	<li>Able to follow instructions as per work instructions;</li>
	<li>Detail orientated.</li>
</ul>

Application Guideline:

<ul>
	<li>Email applications will not be accepted;</li>
	<li>Preference will be given to members of under-represented designated groups;</li>
	<li>Should no feedback be provided within two (2) weeks from the closing date, please consider your application as unsuccessful.</li>
</ul>

Master Aviation Technician (Mechanical) (JHB)

Safair Operations, operating as FlySafair, has a vacancy for First Officers at our various bases in Johannesburg, Cape Town, Durban, Lanseria. The successful applicant will report to the Fleet Captain.

<h5>Job Description</h5>

<ul>
	<li>Operations:
	<ul>
		<li>Ensure safety of flight in a timely manner;</li>
		<li>Monitor the flight path and systems of the aircraft;</li>
		<li>Perform checks and procedures before, during and after each flight;</li>
		<li>Communicate with internal departments, external service providers and passengers;</li>
		<li>Navigate and operate the flight;</li>
		<li>Ensure compliance with regulations and company policies and procedures;</li>
		<li>Uphold the company core competitive edge (i.e., excellent customer service);</li>
		<li>Submit accurate and complete legal administrative documentation;</li>
		<li>In the event of the incapacitation of the Captain, the First Officer will assume command;</li>
	</ul>
	</li>
	<li>The First Officer must take all reasonable steps to:&nbsp;
	<ul>
		<li>Stay updated with the applicable SACAA and international aviation laws, and company Operation manual/s;</li>
		<li>Maintain familiarity with such provisions of the company Operations Manual as are necessary to fulfil the required function;</li>
		<li>Assist the Captain as requested concerning operational and administrative duties in relation to the flight;</li>
		<li>Assist the Captain in upholding a high standard of crew discipline, behaviour, and personal appearance;</li>
	</ul>
	</li>
	<li>The First Officer shall:
	<ul>
		<li>Carry out such duties concerning the flight, in accordance with FlySafair Standard Operating Procedures, including procedures, limitations and performance relating to the specific aircraft type;</li>
		<li>Furthermore, the Captain can allocate any additional duties as required;</li>
		<li>Confirm the safe navigation of the aircraft, maintaining a continuous and independent check upon both the geographical position of the aircraft and its safe terrain clearance;</li>
		<li>Volunteer such advice, information and assistance to the Captain as may contribute favorably towards the safe and efficient conduct of the flight;</li>
		<li>Maintain a high personal standard of discipline, conduct and appearance as a representative of the Company;</li>
		<li>Support the Captain in the development and maintenance of a high standard of professional expertise and morale amongst the crew;</li>
		<li>Ensure compliance with the companies operations manual at all times.</li>
	</ul>
	</li>
	<li>Pre-Flight:
	<ul>
		<li>The First Officer must be fully aware of the planned flight route, contents of briefing sheets, and the forecast with conditions and runway states at the destination and alternate aerodromes;</li>
		<li>Perform all checks outlined in the Operations Manual and fill out all required documents accordingly;</li>
		<li>Work collaboratively with the Captain to review all documents and information necessary to make an informed decision regarding fuel selection, alternates, and any restrictions that may be present on the flight;</li>
	</ul>
	</li>
	<li>In-Flight:
	<ul>
		<li>Perform or monitor the execution of all normal, abnormal and emergency checklists in the manner specified in the Operations;</li>
		<li>Manual and ensure that they are all properly completed;</li>
		<li>Monitor all aspects of the flight, checking that correct procedures and techniques are used, crosschecking all flight instrument indications, especially altitude/height, speed and heading, and advising the Captain immediately If the aircraft deviates from the planned flight path, or if the pilot observes the onset of a hazardous situation, or if any abnormal instrument reading, warning light, or indicator is detected;</li>
		<li>Conduct R/T communications as and when required;</li>
	</ul>
	</li>
	<li>Post-Flight:
	<ul>
		<li>Ensure all post-flight procedures are completed as per the OM and FCOM;</li>
		<li>Submit all relevant documentation and/ or reports i.e. IQSMS.</li>
	</ul>
	</li>
</ul>

<h5>Job Requirements</h5>

<ul>
	<li>Grade 12 or equivalent;</li>
	<li>SACAA Commercial (Essential);</li>
	<li>SACAA ATPL (Preferred);</li>
	<li>Class 1 SACAA Medical (Essential);</li>
	<li>Type rated on Boeing (Advantageous);</li>
	<li>Experience on Commercial Jets over 20 Tons (Advantageous);</li>
	<li>Non-Type Rated or Boeing Type rated with a minimum of 1500 Hours, of which shall include 500 hours Multi-Turbine time (Essential);</li>
	<li>Multi Crew experience (Essential);</li>
	<li>No existing medical conditions;</li>
	<li>Willing to sign applicable training bond/s;</li>
	<li>No criminal record;</li>
	<li>Willing to undergo a drug and alcohol test;</li>
	<li>Own transport and RSA Driver’s License;</li>
	<li>SA Citizen with proof of identity;</li>
	<li>Willing to undergo Psychometric assessments;</li>
	<li>Valid RSA Passport;</li>
	<li>Must be willing to work irregular hours on a roster;</li>
	<li>Must have detailed knowledge and understanding of National Aviation regulations such as SACAA, ICAO;</li>
	<li>Knowledge of Doc 8186 (Essential);</li>
	<li>Knowledge of Commercial and Airline Transport Pilots licensing content.</li>
</ul>

Personal Attributes:

<ul>
	<li>Immaculate time keeping;</li>
	<li>Good interpersonal skills;</li>
	<li>Professional;</li>
	<li>High integrity;</li>
	<li>Well-groomed;</li>
	<li>Disciplined;</li>
	<li>Excellent Situational awareness;</li>
	<li>Good leadership skills;</li>
	<li>Ability to work irregular hours;</li>
	<li>Positive attitude;</li>
	<li>Be able to handle high levels of responsibility/pressure;</li>
	<li>Be a team player and keep up positive morale;</li>
	<li>Excellent writing skills;</li>
	<li>Excellent communication skills.</li>
</ul>

First Officer

Safair Operations, operating as FlySafair, has vacancies for Flight Attendants based at our Lanseria Airport. The successful applicant will report to the Cabin Services Manager.

<h5>Job Description</h5>

<ul>
	<li>Continuously ensure compliance to applicable safety policies and procedures;</li>
	<li>Ensure the efficient execution of all activities relating to a positive passenger experience;</li>
	<li>Continuously promote a high level of integrity;</li>
	<li>Ensure a high standard of administrative compliance.</li>
</ul>

<h5>Job Requirements</h5>

<ul>
	<li>Grade 12 or equivalent;</li>
	<li>Current and Valid (non-negotiable):</li>
	<li>SACAA Cabin Crew License;
	<ul>
		<li>Avmed DD50 Medical Certificate;</li>
		<li>Dangerous Goods Certificate;</li>
		<li>Ditching Certificate;</li>
		<li>Fire Fighting Certificate;</li>
	</ul>
	</li>
	<li>Valid SA driver’s licence and own motor vehicle (non-negotiable);</li>
	<li>Level 4 English language proficiency;</li>
	<li>Medically fit and able to swim;</li>
	<li>Willingness to work shifts, weekends and on public holidays. This includes early morning sign-on’s or late evening sign-offs.</li>
</ul>

Personal Attributes:

<ul>
	<li>Attentive and compassionate with excellent communication and interpersonal skills;</li>
	<li>Customer-service orientated with exceptional diplomacy and unquestionable integrity;</li>
	<li>High commitment to safety and able to operate under stressful conditions;</li>
	<li>Professional both in behaviour and conduct;</li>
	<li>Well-groomed and immaculate appearance (100% Adherence to company uniform and grooming regulations);</li>
	<li>No visible tattoos;</li>
	<li>Immaculate time keeping.</li>
</ul>

Application Guideline:

<ul>
	<li>Email applications will not be accepted;</li>
	<li>Preference will be given to members of under-represented designated groups;</li>
	<li>Should no feedback be provided within two (2) weeks from the closing date, please consider your application as unsuccessful.</li>
</ul>

Flight Attendants

Role: Data Controller Location: Prestwick Contract: Until end of 2025 (Inside IR35)Overview: This role is responsible for maintaining and updating the document management system and technical library, ensuring accurate and timely distribution of engineering data across departments.Key Duties:<ul><li>Manage and issue drawings and documents via the document control system.</li><li>Maintain Technical Control Manuals for site projects.</li><li>Support engineering, quality, and production teams with data and documentation.</li><li>Assist with visual displays and control documents to improve internal communication.</li><li>Ensure supply chain documentation is current and accessible.</li><li>Organize manual and digital filing systems.</li><li>Support bid preparation and new business integration through data coordination.</li></ul>Requirements:<ul><li>Minimum two years of office experience with filing systems.</li><li>Strong communication and interpersonal skills.</li><li>Proficient in Microsoft Word, Excel, PowerPoint, and Access.</li><li>Detail-oriented with the ability to prioritize tasks independently</li></ul>Please apply with your CV and a recruiter will contact you within 48 hours. This vacancy is being advertised by Belcan data controller, document controller, data, engineering data, engineering admin, microsoft packages, engineering drawings, filing systems, document management system, project admin

Data Controller 

ALG has a number of great opportunities for Calibration Technician's to join a well-established commercial organisation based at Tullamarine Airport. The position will give the successful candidates the chance to get hands on exposure and the opportunity to work alongside aircraft engineers and other skilled technicians. The contract is open ended and successful candidates would be working on a Monday to Friday Pattern. The typical shift time would be from 0700 - 15:30. This role is offering a rate of pay of $40.50 + Super. Some of the main responsibilities of the position are:<ul><li>Maintaining company premises and equipment</li><li>Undertaking repairs and servicing of equipment</li><li>Mechanical and Torque Testing</li><li>Assist in the installation and validation of new equipment</li><li>Tool handling and management</li><li>Manual handling</li><li>Record and report on testing results</li><li>Executing related task as part of the maintenance team and tacking instructions from Aircraft maintenance engineers</li></ul>The successful candidates possess the following attributes:<ul><li>Experience working in a calibration environment (Electrical or Mechanical is desirable)</li><li>Knowledge in tool management processes and tool maintenance</li><li>Demonstrated ability to work and communicate effectively with all levels of stakeholders</li><li>Full working rights in Australia</li><li>Willing to undergo a background security check (ASIC)</li><li>Willing to comply with medical requirement (drug/alcohol)</li><li>Strong attention to details, ability to multi-task</li><li>Demonstrate full compliance will all work rules and regulation.</li></ul>Eligible candidates with the above qualities are encouraged to apply now! For further information, please contact Jay Duong at <a href="tel:(07) 3860 4747" target="_blank">(07) 3860 4747</a> (Mon-Fri 08:30-17:00 AEST).Calibration Technician, Calibration, Testing, tool management , Engineer, Entry level, Instrument Technician, Testing &amp; Inspection, Electrical calibration, Mechanical calibration, Manufacturing, Automotive, Aerospace, Load measurement devices

Calibration Technician

<h3>Avionic Fitter</h3>Location: OxfordContract: 3 months (high chance of further extensions) Work Pattern: Mon - Fri / 08:00 - 17:00 / 40 hours per week. Pay Rate: £21.05 Per hour (PAYE)Overview: This role involves supporting aircraft installation and maintenance activities, ensuring safety, airworthiness, and compliance with engineering standards. You'll work closely with supervisors, engineers, and design teams to deliver high-quality avionic solutions.Key Responsibilities:<ul><li>Install, repair, and maintain avionic systems and electrical looms</li><li>Interpret wiring diagrams and design data accurately</li><li>Perform off-aircraft workshop tasks and assist with hangar operations</li><li>Support aircraft movements and general housekeeping</li><li>Ensure health &amp; safety compliance and use of PPE</li><li>Collaborate with design office and contribute to continuous improvement</li></ul>Requirements:<ul><li>Experience with helicopter systems and confined space work</li><li>Skilled in soldering, crimping, and continuity testing</li><li>Familiarity with specialist test equipment</li><li>Ability to work independently and as part of a team</li><li>Flexible, reliable, and detail-oriented</li><li>Comfortable with shift patterns (allowance payable)</li><li>IT skills (Google Workspace, SAP, MS Office - desirable)</li></ul>Qualifications:<ul><li>Formal aviation apprenticeship or equivalent</li><li>Valid driving license</li></ul>Please apply now and a Recruiter will contact you within 48 hours. This vacancy is being advertised by Belcan Avionic fitter, aerospace fitter, helicopters, aircraft instillation, aircraft maintenance, avionic systems, electrical looms, fitter,

Avionic Fitter 

Manufacturing Engineering - Serial Process Engineer Location: Broughton Production SiteContract: 12 months (Inside IR35)Pay Rate: £36 per hour (via an umbrella company) Belcans' client, who is a leading aerospace manufacturer is looking for a Serial Process Engineer to support production by bridging the gap between design, engineering, and shop floor operations. This role focuses on maintaining and improving work instructions based on technical drawings, using SAP.Key Responsibilities:<ul><li>Develop and maintain assembly processes and tooling specifications.</li><li>Ensure alignment between manufacturing and design documentation.</li><li>Support production with work instructions, troubleshooting, and process improvements.</li><li>Analyse deviations, write concessions, and contribute to industrial planning and product definition.</li><li>Review design packages and raise queries as needed.</li></ul>Skills &amp; Experience:<ul><li>Strong understanding of assembly systems and machining/manual processes.</li><li>Experience in industrialisation and work preparation.</li><li>Proficient in MS Office or Google Workspace; SAP experience is highly desirable.</li><li>Creative, organised, and collaborative approach to problem-solving.</li></ul>If you are interested, please click on the link and apply with your CV now. This vacancy is being advertised by Belcan SAP, processes, modifications, aerospace, avaiation, production process, manufacturing process,

119 Contract Jobs