field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

Position and Responsibility<ul><li>Act as Electrical/Avionic Design Engineer – designing cabin related and avionics systems.</li><li>Support her/his superiors in developing below listed systems` design:</li><li>Environmental control (air-conditioning, heating, humidification)</li><li>In-flight entertainment, cabin management</li><li>Communication and computer networks (Telephony, GSM, LAN/WLAN)</li><li>Satellite communication, High-speed Data, Satellite TV</li><li>Power generation, supply and distribution</li><li>Galleys, seats, interior doors, window shades</li><li>Smoke detection and passenger oxygen</li><li>Water System</li><li>Cabin Basic Lighting System</li><li>Emergency Lighting System</li><li>Work independently on system designs</li><li>Modify &amp; Commission and test of electrical/avionic systems on Transport Category Aircraft for cabin completion and modification projects</li></ul>&nbsp; Key Aspects of the Activity<ul><li>Preparation of System-Specification and Service-Definitions</li><li>Support to project preparation (i.e. Request for Quotation, Order Description, Material Orders)</li><li>Preparation of Layout Drawings, Block Diagrams, Wiring Diagrams, Item Lists,&nbsp;Wire Lists, Drawings Lists and handling of related ECO and PCR</li><li>Preparation of Installation Instruction and Documentation (i.e. EO, SB)</li><li>Preparation of Ground- , Flight Checks and Test Procedures</li><li>Preparation of Compliance Documentation, Reports &amp; Analysis regarding</li><li>Equipment Qualification, Wire-Routing and Installation, Safety and Hazard&nbsp;Assessments</li><li>Administration of Vendor Information and Manuals</li><li>Liaison and cooperation with Avionic &amp; Electrical Services Department</li><li>Liaison and cooperation with Office of Airworthiness, Mechanical Production</li><li>Engineering and Mechanical Design Engineering</li><li>Liaison and cooperation with Vendors and Supplier of parts, components and&nbsp;avionic/electrical systems and Test-Facilities</li><li>Selection of equipment, components, materials</li><li>Development of electrical wiring diagrams (Visio)</li><li>Preparation of ground-and flight-test procedures</li><li>Develop technical and safety and certification documentation (reports, analysis, assessments)</li><li>Develop engineering standards</li></ul>Required Skills and Qualifications<ul><li>Applicable Electronic/Electrical Engineering degree or similar qualification required</li><li>Aviation Experience &amp; Design Engineering experience would be advantageous</li><li>Minimum 3 years’ experience</li><li>MS Office (Visio, Word, Excel, Power Point) and CAD literacy</li><li>Good communication skills in English, German and/or French advantageous</li><li>Good at time management</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

AMAC Aerospace Switzerland AG

AMAC Aerospace

Avionics & Electrical Engineer

At Cathay, we are committed to moving people forward in life — whether through travel, lifestyle experience, or career growth. We connect people not only to meaningful travel experiences,&nbsp;but also to careers that take you places. With a diverse range of opportunities across our teams in Hong Kong, the Chinese mainland, and the regions, we are here to help you grow and develop your career with Cathay.Our&nbsp;Talent Community&nbsp;is designed for individuals who share our ambitions to become one of the world's greatest service brands.&nbsp;As a member, you will receive regular updates that include the latest developments within our company, exclusive insights into our career opportunities, and invitations to upcoming recruitment events.Whether you're preparing for your next move or just staying in touch, we welcome you to be part of a journey that takes your career to new heights — and beyond.&nbsp;Personal &amp; Application InformationCathay Pacific is an Equal Opportunities Employer. Personal data provided by job applicants will be used strictly in accordance with our <a href="https://careers.cathaypacific.com/en/pics-page" target="_blank">Applicant Personal Information Collection Statement</a>&nbsp;and for recruitment purposes only. Candidates not notified within eight weeks may consider their application unsuccessful. We keep records of your data for no longer than is necessary for the purpose for which we obtained them and any other permitted linked purposes. If your application is unsuccessful, we will keep your details on file for as long as is necessary to process your application or for the purposes of further job opportunities if you agree to such longer periods.&nbsp;

Cathay Pacific Airways

Cathay Talent Community

Your daily tasks &amp; responsibilities<ul><li>As part of the Systems Engineering Team you design installations and modifications with focus on aircraft cabin noise reduction</li><li>Support the in-house acoustic laboratory with selection of equipment, development and implementation of standards and test procedures</li><li>Ensure adequate communication and liaison internally, especially within the Design Organization, with Production and Maintenance and with external partners and suppliers</li><li>Support the Team Leader Mechanical Design Engineering in administrative and organizational tasks</li><li>Ensure correct consideration and application of Certification Basis, Rules and Regulations, Means of Compliance and Interpretations in the engineering output for the product, system or installation designed</li></ul>Main Activities<ul><li>Conduct in-house tests of materials and assemblies</li><li>Preparation of technical documentation such as reports, analysis, test procedures and installation instructions</li><li>Support designs with acoustic analysis and calculations</li><li>Preparation of mechanical drawings (2D/3D-CAD)</li><li>Support and perform noise measurement ground and flight tests</li><li>Resolve installation process and noise treatment issues; provide recommendation for enhancements</li><li>All other duties assigned</li></ul>The expertise you have &amp; skills you bring&nbsp;<ul><li>Engineering Degree in Acoustic Engineering, Mechanical Engineering, Aeronautical Engineering or relevant field</li><li>Profound knowledge of the principles of sound and vibration</li><li>Ideally 3+ years of experience in an acoustic engineering role</li><li>Proactive Teamplayer with excellent written and verbal communication skills in English - additionally French and/or German is advantageous</li><li>Proficient in MS Office and popular 2D/3D design software</li><li>Must show high initiative, be self-motivated, and have ability to act independently on technical matters, manage time effectively</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>Additional information<ul><li>General working place: Hangar Facilities at EuroAirport Basel-Mulhouse-Freiburg</li></ul>

Acoustic Engineer – Aircraft Cabins

Key Aspects of the Activity<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non-routine task cards</li><li>Performance of related operational tasks</li><li>Troubleshoot, repair, inspect and rectify flight problems</li><li>Perform and record all work performed in accordance appropriate manuals and regulations</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li><li>Work away from home base to support customers during AOG</li></ul> Required Skills and Qualifications<ul><li>5&nbsp;years practical experience of base maintenance</li><li>Holder of European EASA Part-66 Cat B2 with 2-3 years’ experience as Certifying Staff of the following aircraft types; B737, B747, B757, B767, B777, B787 rating with minimum 3 years’ experience as Certifying Staff on aircraft type</li><li>Fluent in English</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience</li><li>Awareness of highest standard in terms of quality, reliability and safety</li></ul> What we offer you (among other things)<ul><li>Working in an owner-managed, young and dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidized meals in our canteen, as well as parking spaces (or free shuttle bus transports) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ</li></ul>

B2 EASA Licensed Avionics Technician Boeing

Position und Responsibilities<ul><li>Work in accordance with applicable procedure as per AMAC DOE, POE, MOE, CAME and other AMAC Specification</li><li>Ensure adequate communication and liaison AMAC internally and especially within the Quality Assurance Team, Maintenance and the Production Team</li><li>Liaise, support and attend audits of authorities and establish audit checklists</li><li>Review and amend Organisation Expositions, Capability List, Procedures (Handbooks, Process Specification, Technical Instructions) and Forms</li><li>Provide continuous detailed account of the overall current quality status</li></ul>Main Activities<ul><li>Preparation and performance of internal training and briefing sessions related to AMAC internal procedures and other technical subjects</li><li>Preparation und update of company manuals procedures</li><li>Support to the Maintenance, Production, Design Organisation and CAMO regarding application, extension and renewal of Maintenance Licences, Internal Authorisations</li><li>Act as Quality Inspector for the Production, Maintenance, Design and CAMO Organisation</li><li>Act as Internal Quality Auditor</li><li>Support the Manager QA and the Director QA in administrative and organisational aspects, in particular for the issuance, renewal or changes of Approval Certificates</li></ul>Required Skills and Qualifications<ul><li>Several years of practical experience within the aviation environment</li><li>Active / former holder of Aircraft Maintenance Licence preferably</li><li>Several years of experience in functions related to quality assurance and / or Quality inspection</li><li>Auditing experience</li><li>Detailed knowledge about EASA Regulations Part 145, Part M-CAMO and / or Part 21 Subpart G-J and Guidance Materials</li><li>Ability to establish and write handbooks, procedures, technical instructions and audit-reports</li></ul>

Inspector Quality Assurance

First2 Resource partner company CRM is looking for B757 and B767 ICAO B1/B2 Engineers on behalf of our client Hi-Jet Aviation.Hi-Jet Aviation is an Icelandic EASA Part-145 which provides high-quality Line maintenance services worldwide.With the combination of experience, global knowledge of the industry, great flexibility and their passion to serve to the world of aviation, they can provide a strong and competitive product for their customers. Role Requirements: &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current B1/B2 license issued by ICAO •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current on B757 and B767 •&nbsp;&nbsp;&nbsp;&nbsp;Engine types: B757 RB211 and B767 Ge CF6 •&nbsp;&nbsp;&nbsp;&nbsp;Comfortable using aircraft maintenance documentation, computer-based reporting and recording systems&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Strong aircraft maintenance experience in line-maintenance&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Working knowledge of health and safety legislation&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Renewed Medical certificateBenefits Package: &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Competitive fee and extra payments for flying spanner duty •&nbsp;&nbsp;&nbsp;&nbsp;Long-term contract •&nbsp;&nbsp;&nbsp;&nbsp;Rotation: 15 days on/15 days off or 20 days on/ 10 days off •&nbsp;&nbsp;&nbsp;&nbsp;Base: Tashkent, Uzbekistan •&nbsp;&nbsp;&nbsp;&nbsp;Travel tickets between home and operating bases provided&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Accommodation and transportation provided when outside of the home baseApplication Process: &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;CRM screening &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interviewWe welcome all applications, but please note we will only contact candidates shortlisted in the second round.

First 2 Resource

B757 & B767 ICAO B1/B2 Engineer for Hi-Jet Aviation

We are looking for an experienced professional to lead and coordinate aircraft base maintenance activities. As Base Maintenance Manager, you will be responsible for supervising on-site teams, managing external MRO contractors, and collaborating with OEMs and internal departments to ensure safe, efficient, and high-quality maintenance execution.Key Responsibilities:<ul><li>Supervise and direct on-site representatives and maintenance personnel during base maintenance events.</li><li>Plan and allocate work schedules, tasks, and resources for base maintenance.</li><li>Ensure all work complies with regulatory, safety, and quality standards.</li><li>Communicate and coordinate with authorities, aircraft manufacturers, and external parties.</li><li>Organize and oversee tender procedures and contracts in cooperation with the Legal Department.</li><li>Coordinate with IOCC and other teams to minimize aircraft downtime and maximize cost efficiency.</li><li>Plan budgets, monitor costs, and approve final invoices.</li><li>Identify risks and implement corrective actions to ensure smooth maintenance operations.</li><li>Support and guide on-site representatives and provide training as needed.</li></ul><h4>Employee perks, benefits</h4><ul><li>Attractive and dynamic environment of an airline company</li><li>​Providing a laptop and mobile phone</li><li>Experience your favorite events at the Ondrej Nepela Arena in Bratislava from the comfort of our corporate SKYBOX</li><li>Take advantage of a financial benefit of €100 per year for cultural activities within our Sky Culture program or use them for health or sports purposes within the Fly Fit program!</li><li>MultiSport card</li><li>Birthday day off - we gift you a well-deserved rest on your birthday​</li></ul><h3>Requirements for the employee</h3><h4>Language skills</h4>English - Advanced (C1)<h4>Other knowledge</h4>Microsoft Word - Skillful Microsoft Excel - Skillful OASES - Advanced AMOS MRO software - Skillful<h4>Driving licence</h4><h4>Experience in the position/sector</h4>Maintenance engineer, Base maintenance manager<h4>Personality requirements and skills</h4><ul><li>Minimum 5 years of experience in civil aviation.</li><li>Previous hands-on aircraft maintenance experience, preferably with a heavy maintenance background.</li><li>Knowledge of EU management system requirements, including safety management and compliance monitoring.</li><li>Strong decision-making skills and accountability.</li><li>Ability to implement corrective actions and continuous improvement initiatives.</li><li>Proactive, problem-solving mindset with professionalism.</li><li>Team player capable of collaborating effectively across cross-functional teams.</li></ul>

AirExplore s.r.o.

AirExplore

Base Maintenance Manager

First2 Resource is looking for ATR 42/72 B1.1/B2 Engineers and Certifying Staff on behalf of our client, Fleet Air.Established on June 21st, 2007, their years of experience, combined with their unwavering dedication to aviation and their clients, position Fleet Air as one of the leaders in cargo flights.Based in Hungary, Fleet Air International operates short and middle-haul European cargo air routes, as well as African and Middle Eastern transport solutions.Role Requirements:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current B1.1/ B2 license issued by EASA &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current on ATR 42-200/300 series (PWC PW120)&nbsp; and ATR 72-100/200 series (PWC PW120)&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Familiar with AirNav, standard MS Office •&nbsp;&nbsp;&nbsp;&nbsp;Strong aircraft maintenance experience in line maintenanceBenefits Package:&nbsp; •&nbsp;&nbsp;&nbsp;Competitive fee • &nbsp; Welcome bonus • &nbsp; &nbsp;Assistance with HU work permit • &nbsp; &nbsp;Schedule: 5/2 08:00-17:00, including 1 hour break&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Rotation depending on agreement • &nbsp; &nbsp;One-year contract with the possibility of extension •&nbsp;&nbsp;&nbsp;&nbsp;Base Maintenance: Hof EDQM •&nbsp;&nbsp;&nbsp;&nbsp;Travel tickets between home and operating bases providedApplication Process:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;First2 Resource screening&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interviewWe welcome all applications, but please note we will only contact candidates shortlisted in the second round.

ATR 42/72 B1.1/B2 Engineer & Certifying Staff for Fleet Air

First2 Resource partner company CRM is looking for B747-400, or B767, or B777 B1/B2 Engineers on behalf of our client Challenge Technic. &nbsp;Originally founded as JETMX in 2018, Challenge Technic today employs highly skilled technical staff in 5 state-of-the-art line stations, whose core focus is absolute airworthiness. 24/7 maintenance operations and a close-knit MRO network ensure that airline customers are never parted from their assets for longer than necessary.Role Requirements:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current B1/ B2 license issued by EASA &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current on B747-400 (GE-CF6/PW4000), or B767 (PW4000), or B777 •&nbsp;&nbsp;&nbsp;&nbsp;Comfortable using aircraft maintenance documentation, computer-based reporting and recording systems •&nbsp;&nbsp;&nbsp;&nbsp;Strong aircraft maintenance experience in line-maintenanceBenefits Package:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Competitive fee •&nbsp;&nbsp;&nbsp;&nbsp;Additional location compensation • &nbsp; &nbsp; &nbsp; Additional payment for each type rating •&nbsp;&nbsp;&nbsp;&nbsp;Indefinite contract •&nbsp;&nbsp;&nbsp;&nbsp;Rotation: 3 weeks on/3 weeks off •&nbsp;&nbsp;&nbsp;&nbsp;Base: Tel Aviv •&nbsp;&nbsp;&nbsp;&nbsp;Travel tickets between home and operating bases provided •&nbsp;&nbsp;&nbsp;&nbsp;Accommodation and transportation provided when outside of the home baseApplication Process:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;CRM screening&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interviewWe welcome all applications, but please note we will only contact candidates shortlisted in the second round.

B747-400 / B767 / B777 B1/B2 Engineer for Challenge Technic (TLV)

First2 Resource partner company CRM is looking A320F B1/B2 Engineers on behalf of our client ETG Maintenance.ETG Maintenance is an EASA Part-145 approved organization based in Republic of Bulgaria. They perform all kinds of base and line maintenance for Airbus A320 CEO, MD 80 and Boeing 737 Classic/NG, including heavy and redelivery checks.Role Requirements:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current B1/ B2 license issued by EASA &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current on A320F •&nbsp;&nbsp;&nbsp;&nbsp;Familiar with AirNav, standard MS Office •&nbsp;&nbsp;&nbsp;&nbsp;Strong aircraft maintenance experience in line-maintenanceBenefits Package:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Competitive monthly fee •&nbsp;&nbsp;&nbsp;&nbsp;Permanent contract •&nbsp;&nbsp;&nbsp;&nbsp;20 days of paid annual leave •&nbsp;&nbsp;&nbsp;&nbsp;Approx. 160 working hours per month (10-hour shifts) •&nbsp;&nbsp;&nbsp;&nbsp;Base maintenance: Varna, Bulgaria •&nbsp;&nbsp;&nbsp;&nbsp;Line maintenance: Across the EU •&nbsp;&nbsp;&nbsp;&nbsp;Meal vouchers provided •&nbsp;&nbsp;&nbsp;&nbsp;Travel expenses covered •&nbsp;&nbsp;&nbsp;&nbsp;Visa support if required •&nbsp;&nbsp;&nbsp;&nbsp;Accommodation and ground transportation provided during assignmentsApplication Process:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;CRM screening&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interview We welcome all applications, but please note we will only contact candidates shortlisted in the second round.

158 Technical and engineering Jobs