field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

aviationcv_job_recency

Position and Responsibility<ul><li>Act as Electrical/Avionic Design Engineer – designing cabin related and avionics systems.</li><li>Support her/his superiors in developing below listed systems` design:</li><li>Environmental control (air-conditioning, heating, humidification)</li><li>In-flight entertainment, cabin management</li><li>Communication and computer networks (Telephony, GSM, LAN/WLAN)</li><li>Satellite communication, High-speed Data, Satellite TV</li><li>Power generation, supply and distribution</li><li>Galleys, seats, interior doors, window shades</li><li>Smoke detection and passenger oxygen</li><li>Water System</li><li>Cabin Basic Lighting System</li><li>Emergency Lighting System</li><li>Work independently on system designs</li><li>Modify &amp; Commission and test of electrical/avionic systems on Transport Category Aircraft for cabin completion and modification projects</li></ul>&nbsp; Key Aspects of the Activity<ul><li>Preparation of System-Specification and Service-Definitions</li><li>Support to project preparation (i.e. Request for Quotation, Order Description, Material Orders)</li><li>Preparation of Layout Drawings, Block Diagrams, Wiring Diagrams, Item Lists,&nbsp;Wire Lists, Drawings Lists and handling of related ECO and PCR</li><li>Preparation of Installation Instruction and Documentation (i.e. EO, SB)</li><li>Preparation of Ground- , Flight Checks and Test Procedures</li><li>Preparation of Compliance Documentation, Reports &amp; Analysis regarding</li><li>Equipment Qualification, Wire-Routing and Installation, Safety and Hazard&nbsp;Assessments</li><li>Administration of Vendor Information and Manuals</li><li>Liaison and cooperation with Avionic &amp; Electrical Services Department</li><li>Liaison and cooperation with Office of Airworthiness, Mechanical Production</li><li>Engineering and Mechanical Design Engineering</li><li>Liaison and cooperation with Vendors and Supplier of parts, components and&nbsp;avionic/electrical systems and Test-Facilities</li><li>Selection of equipment, components, materials</li><li>Development of electrical wiring diagrams (Visio)</li><li>Preparation of ground-and flight-test procedures</li><li>Develop technical and safety and certification documentation (reports, analysis, assessments)</li><li>Develop engineering standards</li></ul>Required Skills and Qualifications<ul><li>Applicable Electronic/Electrical Engineering degree or similar qualification required</li><li>Aviation Experience &amp; Design Engineering experience would be advantageous</li><li>Minimum 3 years’ experience</li><li>MS Office (Visio, Word, Excel, Power Point) and CAD literacy</li><li>Good communication skills in English, German and/or French advantageous</li><li>Good at time management</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

AMAC Aerospace Switzerland AG

AMAC Aerospace

Avionics & Electrical Engineer

Your daily tasks &amp; responsibilities<ul><li>As part of the Systems Engineering Team you design installations and modifications with focus on aircraft cabin noise reduction</li><li>Support the in-house acoustic laboratory with selection of equipment, development and implementation of standards and test procedures</li><li>Ensure adequate communication and liaison internally, especially within the Design Organization, with Production and Maintenance and with external partners and suppliers</li><li>Support the Team Leader Mechanical Design Engineering in administrative and organizational tasks</li><li>Ensure correct consideration and application of Certification Basis, Rules and Regulations, Means of Compliance and Interpretations in the engineering output for the product, system or installation designed</li></ul>Main Activities<ul><li>Conduct in-house tests of materials and assemblies</li><li>Preparation of technical documentation such as reports, analysis, test procedures and installation instructions</li><li>Support designs with acoustic analysis and calculations</li><li>Preparation of mechanical drawings (2D/3D-CAD)</li><li>Support and perform noise measurement ground and flight tests</li><li>Resolve installation process and noise treatment issues; provide recommendation for enhancements</li><li>All other duties assigned</li></ul>The expertise you have &amp; skills you bring&nbsp;<ul><li>Engineering Degree in Acoustic Engineering, Mechanical Engineering, Aeronautical Engineering or relevant field</li><li>Profound knowledge of the principles of sound and vibration</li><li>Ideally 3+ years of experience in an acoustic engineering role</li><li>Proactive Teamplayer with excellent written and verbal communication skills in English - additionally French and/or German is advantageous</li><li>Proficient in MS Office and popular 2D/3D design software</li><li>Must show high initiative, be self-motivated, and have ability to act independently on technical matters, manage time effectively</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>Additional information<ul><li>General working place: Hangar Facilities at EuroAirport Basel-Mulhouse-Freiburg</li></ul>

Acoustic Engineer – Aircraft Cabins

Key Aspects of the Activity<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non routine task cards</li><li>Performance of related operational tasks</li><li>Perform daily / weekly checks as required</li><li>Perform pre-flight and post-flight inspections</li><li>Review and carry out necessary actions to rectify flight problems</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li></ul> Required Skills and Qualifications<ul><li>5 years practical experience of base maintenance on Boeing</li><li>Holder of EASA Part-66 Cat B1</li><li>B737, B747, B757, B767, B777, B787 rating with minimum 3 years experience as Certifying Staff on aircraft type</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Experience in Corporate Aviation is an advantage</li><li>Fluent in English</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

B1 EASA Licensed Aircraft Engineer Boeing

Position and Responsibilities<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non-routine task cards</li><li>Performance of related operational tasks</li><li>Advanced trouble shooting experience</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li></ul> Required Skills and Qualifications<ul><li>5 years practical experience of base maintenance on Airbus types</li><li>Holder of EASA Part-66 Cat B1.1 License</li><li>A320 Family, and/or &nbsp;A330/340/A350 rating with minimum 3 years’ experience as Certifying Staff on aircraft type</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Experience in Corporate Aviation is an advantage</li><li>Fluent in English</li><li>Willing to re-locate to Basel area</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

B1 EASA Licensed Aircraft Technician Airbus

Position and Responsibilities<ul><li>Ensure that Certification Basis is appropriate for the product, system or installation and that all applicable rules, regulations, Means of Compliance and interpretations are applied correctly.</li><li>Ensure adequate communication and liaison internally and with external Third Parties.</li><li>Act as Certification Engineer.</li></ul>Main Activities<ul><li>Internal and external coordination of certification-activities for outfitting- and modification-projects between Office of Airworthiness, Compliance Verification Engineers, Engineering Department and Third Parties such as Air Authorities, Sub-Contractors, DERs</li><li>Preparation of certification documentation and certification supporting documentation such as Certification Plan, Certification Compliance Sheets, Master Data List, Classification of Design Changes, STC-Application</li><li>Perform reviews of technical A/C documentation and coordination-activities for A/C operational aspects such as registration changes, import and export of A/C, compliance to JAR OPS 1 (EU OPS)</li><li>Support the Head of Design Organisation, Chief of Office of Airworthiness and the Office of Airworthiness in administrative and organisational aspects</li></ul>Required Skills and Qualifications<ul><li>Qualification as a Senior Engineer, i.e. several years of education and experience in the fields of aviation engineering and design.</li><li>Engineering specialist in one of the mentioned disciplines (Electric/Avionic/Systems/Mechanic)</li><li>Experience in the various approval procedures would be appreciated&nbsp;(EASA Part 21 / CS / JAR / FAR).</li><li>Computer literate with MS Office software (Word, Excel, Power Point)</li><li>Good communication skills in English; German or French in addition will be an advantage.</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul>

Certification Engineer

Your daily tasks &amp; responsibilities<ul><li>Performance of routine and non-routine task cards</li><li>Performance of related operational tasks</li><li>Troubleshoot, repair, inspect and rectify aircraft faults</li><li>Perform and record all work performed in accordance appropriate manuals and regulations</li><li>Work away from home base to support customers during AOG</li></ul>The expertise you have &amp; skills you bring&nbsp;<ul><li>Holder of European EASA Part-66 Cat B2</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Fluent in English</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Aircraft type rating once competence is proven</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>Additional information<ul><li>General working place: Hangar Facilities at EuroAirport Basel-Mulhouse-Freiburg</li></ul>

B2 EASA Licensed Avionics Engineer

Position and responsibilities:<ul><li>Strong experience in civil aircraft engine</li><li>Participate in and develop reporting process of our power plant and nacelle</li><li>Lead to solve designated technical issues of our aircraft’s power plant system</li><li>Develop communication process with the different engine manufacturer</li><li>Read and interprets manufacturers maintenance manuals, service bulletins and other specifications to determine feasibility and methods of repair</li></ul>Required skills and qualifications:<ul><li>Good English level / French or German of advantage</li><li>Minimum of 5 years’ experience on engine shop level</li><li>Borescope experience/approval</li><li>Able to perform troubleshooting and maintenance work</li><li>Able to issue reports and communicate with the different engine manufacturers</li><li>EASA B1 Licensed or Swiss “S” licensed of advantage</li></ul>Ideally experienced on following engine types but not limited to:<ul><li>GE CF6 series</li><li>GE 90 series</li><li>GE CF34 series</li><li>Pratt &amp; Whitney PW 4000</li><li>CFM 56-5A/-5B/-5C/-7</li><li>CFM LEAP 1A</li><li>RR RB211 Trent 700</li><li>RR RB211 Trent 500</li><li>Pratt &amp; Whitney 1100G</li><li>IAE V2500</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young and dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like at least 5 weeks of holidays</li><li>A workplace in the middle of the city of Basel and various employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>Corporate events like our summer BBQ and the famous annual Christmas Party</li></ul> Additional information<ul><li>General working place: Hangar facilities at EuroAirport Basel-Mulhouse-Freiburg</li></ul>

7 Jobs in Switzerland