field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

Position and Responsibility<ul><li>Act as Electrical/Avionic Design Engineer – designing cabin related and avionics systems.</li><li>Support her/his superiors in developing below listed systems` design:</li><li>Environmental control (air-conditioning, heating, humidification)</li><li>In-flight entertainment, cabin management</li><li>Communication and computer networks (Telephony, GSM, LAN/WLAN)</li><li>Satellite communication, High-speed Data, Satellite TV</li><li>Power generation, supply and distribution</li><li>Galleys, seats, interior doors, window shades</li><li>Smoke detection and passenger oxygen</li><li>Water System</li><li>Cabin Basic Lighting System</li><li>Emergency Lighting System</li><li>Work independently on system designs</li><li>Modify &amp; Commission and test of electrical/avionic systems on Transport Category Aircraft for cabin completion and modification projects</li></ul>&nbsp; Key Aspects of the Activity<ul><li>Preparation of System-Specification and Service-Definitions</li><li>Support to project preparation (i.e. Request for Quotation, Order Description, Material Orders)</li><li>Preparation of Layout Drawings, Block Diagrams, Wiring Diagrams, Item Lists,&nbsp;Wire Lists, Drawings Lists and handling of related ECO and PCR</li><li>Preparation of Installation Instruction and Documentation (i.e. EO, SB)</li><li>Preparation of Ground- , Flight Checks and Test Procedures</li><li>Preparation of Compliance Documentation, Reports &amp; Analysis regarding</li><li>Equipment Qualification, Wire-Routing and Installation, Safety and Hazard&nbsp;Assessments</li><li>Administration of Vendor Information and Manuals</li><li>Liaison and cooperation with Avionic &amp; Electrical Services Department</li><li>Liaison and cooperation with Office of Airworthiness, Mechanical Production</li><li>Engineering and Mechanical Design Engineering</li><li>Liaison and cooperation with Vendors and Supplier of parts, components and&nbsp;avionic/electrical systems and Test-Facilities</li><li>Selection of equipment, components, materials</li><li>Development of electrical wiring diagrams (Visio)</li><li>Preparation of ground-and flight-test procedures</li><li>Develop technical and safety and certification documentation (reports, analysis, assessments)</li><li>Develop engineering standards</li></ul>Required Skills and Qualifications<ul><li>Applicable Electronic/Electrical Engineering degree or similar qualification required</li><li>Aviation Experience &amp; Design Engineering experience would be advantageous</li><li>Minimum 3 years’ experience</li><li>MS Office (Visio, Word, Excel, Power Point) and CAD literacy</li><li>Good communication skills in English, German and/or French advantageous</li><li>Good at time management</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

AMAC Aerospace Switzerland AG

AMAC Aerospace

Avionics & Electrical Engineer

Dublin Aerospace, headquartered in Dublin, is a global leader in maintenance, repair, and overhaul (MRO) services for airlines and aircraft operators. Specializing in base maintenance, landing gear overhaul, and APU repair, the company is known for its commitment to safety, efficiency, and reliability. With a skilled workforce and a customer-focused approach, Dublin Aerospace delivers innovative, cost-effective solutions, making it a trusted partner for airlines worldwide. Dublin, the capital of Ireland, is a vibrant city with a population of approximately 1.4 million people, making it the largest city in the country. Known for its rich history, iconic Georgian architecture, and thriving cultural scene, Dublin is also an international hub with a diverse and growing expat community, making up around 15% of the population. Many expatriates are attracted to Dublin for its dynamic business environment, high quality of life, and welcoming atmosphere. We at Nobox are committed to your success, offering continuous support throughout the entire selection process to ensure you secure your dream job. Requirements<ul><li>Hold a valid EASA Part 66 B1 License with rating</li><li>Minimum of 5 years’ experience working in 737NG/CL</li><li>Fluency in English, both spoken and written</li><li>Eligible to work in EU</li><li>Good knowledge of MRO computer systems</li><li>Ability to read and comply with repairs and instructions from the relevant manuals</li><li>Ability to work on own initiative, be self-motivated and flexible in their approach to work</li><li>Proven problem solver and decision making skills</li><li>Ability to work withing a team</li><li>A good sense of commercial awareness</li></ul> Benefits<ul><li>Standard 5 day working week – Monday to Friday, daytime Hours</li><li>Permanent Contract</li><li>Competitive salary</li></ul>

Nobox Head Office

Nobox

737 Engineer - Dublin Aerospace

Dublin Aerospace, headquartered in Dublin, is a global leader in maintenance, repair, and overhaul (MRO) services for airlines and aircraft operators. Specializing in base maintenance, landing gear overhaul, and APU repair, the company is known for its commitment to safety, efficiency, and reliability. With a skilled workforce and a customer-focused approach, Dublin Aerospace delivers innovative, cost-effective solutions, making it a trusted partner for airlines worldwide. Dublin, the capital of Ireland, is a vibrant city with a population of approximately 1.4 million people, making it the largest city in the country. Known for its rich history, iconic Georgian architecture, and thriving cultural scene, Dublin is also an international hub with a diverse and growing expat community, making up around 15% of the population. Many expatriates are attracted to Dublin for its dynamic business environment, high quality of life, and welcoming atmosphere. We at Nobox are committed to your success, offering continuous support throughout the entire selection process to ensure you secure your dream job. Requirements<ul><li>Hold a valid EASA Part 66 B1 License with rating</li><li>Minimum of 5 years’ experience working in A320/A330</li><li>Fluency in English, both spoken and written</li><li>Eligible to work in EU</li><li>Good knowledge of MRO computer systems</li><li>Ability to read and comply with repairs and instructions from the relevant manuals</li><li>Ability to work on own initiative, be self-motivated and flexible in their approach to work</li><li>Proven problem solver and decision making skills</li><li>Ability to work withing a team</li><li>A good sense of commercial awareness</li></ul> Benefits<ul><li>Standard 5 day working week – Monday to Friday, daytime Hours</li><li>Permanent Contract</li><li>Competitive salary</li></ul>

A320/330 Engineer

Key Aspects of the Activity<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non-routine task cards</li><li>Performance of related operational and functional tasks</li><li>Performance trouble shooting on engine / airframe systems as required</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li></ul> Required Skills and Qualifications<ul><li>3-5 years practical experience of base maintenance</li><li>Holder of EASA Part-66 Cat B1 with minimum one of the following type ratings:</li><li>Gulfstream IV / 450/ &nbsp;V / 550 / 650 with experience as Certifying Staff</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience desirable</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Fluent in English</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

B1 EASA Licensed Aircraft Engineer Gulfstream

Your daily tasks &amp; responsibilities<ul><li>Lead and organize a skilled base maintenance team with the aircraft supervisor</li><li>Act as certifying staff to release aircraft into service and perform double inspections</li><li>Review and perform troubleshooting, testing, implementation, and maintenance activities according to AMAC MOE procedures</li><li>Assist in ordering necessary tools and ground support equipment Promote AMAC</li><li>Coordinate scheduled and unscheduled maintenance requirements</li><li>Liaise the status and condition of the aircraft systems during the maintenance activities against the relevant departments</li><li>Ensure all maintenance activities comply with regulations and are well-documented</li><li>Obey and promote actively the AMAC Aerospace AG Safety and Quality Policy</li></ul>The expertise you have &amp; skills you bring&nbsp;<ul><li>3-5 years practical experience of base maintenance</li><li>Holder of EASA Part-66 Cat B1/C with minimum one of the following type ratings</li><li>Boeing 737 / 747 / 777 / 787 with experience as Certifying Staff</li><li>Experience in a leader position would be of advantage</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience desirable</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Fluent in English</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

Leader Aircraft Maintenance – Boeing

Position and Responsibilities<ul><li>Ensure that Certification Basis is appropriate for the product, system or installation and that all applicable rules, regulations, Means of Compliance and interpretations are applied correctly.</li><li>Ensure adequate communication and liaison internally and with external Third Parties.</li><li>Act as Certification Engineer.</li></ul>Main Activities<ul><li>Internal and external coordination of certification-activities for outfitting- and modification-projects between Office of Airworthiness, Compliance Verification Engineers, Engineering Department and Third Parties such as Air Authorities, Sub-Contractors, DERs</li><li>Preparation of certification documentation and certification supporting documentation such as Certification Plan, Certification Compliance Sheets, Master Data List, Classification of Design Changes, STC-Application</li><li>Perform reviews of technical A/C documentation and coordination-activities for A/C operational aspects such as registration changes, import and export of A/C, compliance to JAR OPS 1 (EU OPS)</li><li>Support the Head of Design Organisation, Chief of Office of Airworthiness and the Office of Airworthiness in administrative and organisational aspects</li></ul>Required Skills and Qualifications<ul><li>Qualification as a Senior Engineer, i.e. several years of education and experience in the fields of aviation engineering and design.</li><li>Engineering specialist in one of the mentioned disciplines (Electric/Avionic/Systems/Mechanic)</li><li>Experience in the various approval procedures would be appreciated&nbsp;(EASA Part 21 / CS / JAR / FAR).</li><li>Computer literate with MS Office software (Word, Excel, Power Point)</li><li>Good communication skills in English; German or French in addition will be an advantage.</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul>

Certification Engineer

Task Responsibilities:<ul><li>Accomplish work on aircraft, aircraft systems and accessories in accordance with the relevant aircraft technical manuals and instructions.&nbsp;</li><li>Carry out routine tasks/checks and rectify defects during line and base maintenance (including annual checks).</li><li>Ensure work is carried out following aircraft manufacturer's procedures and maintenance practices.</li><li>Ensure duties are accomplished in accordance with EASA and Cargolux procedures and standards laid out in the Cargolux Maintenance Organization Exposition (MOE).</li><li>Signing off work using correct and approved documentation.</li></ul>Essential Requirements For The Position:<ul><li>Be holder of an EASA AML B1 and/or B2 license;</li><li>Experience in Air Tractor AT-800 Series aircraft maintenance will be considered as an advantage;</li><li>At least 5 years' experience&nbsp;acquired in the field (after the basic training);</li><li>Being open-minded and&nbsp;relating comfortably with diverse groups of people;</li><li>Be fluent in English, other&nbsp;languages are considered as an advantage;</li><li>Ability to work in team as&nbsp;well as independently;</li><li>Have good, standard knowledge&nbsp;of MS Office (Excel, Word), Outlook.</li></ul>Working Conditions:<ul><li>A Certificate of good conduct (Casier judiciaire, Polizeiliches Führungszeugnis) will be required in&nbsp;case of positive selection.</li><li>The successful candidate will&nbsp;have to obtain a valid medical fitness certificate for the job issued by the Company doctor prior to the start of the employment.</li><li>The position qualifies as safety-sensitive personnel as per EU Regulation 965/2012. The successful&nbsp;candidate will have to be tested for psychoactive substances prior to the start of the employment.&nbsp;</li><li>Be prepared to travel when&nbsp;required.</li><li>Willing to work on shifts&nbsp;24/7/365.</li><li>Willing to go on detachment during the aerial firefighting season, typically May to October (Schedule would be 50% on, 50% off). Winter season could be possible as well.</li><li>Possess a valid driving license.</li></ul>

Cargolux Airlines International S.A.

Aircraft Mechanic - Air Tractor

Are you an experienced (B1/B2 CASA or EASA or A&amp;P) Licensed Aircraft Maintenance Engineer with experience on Airbus or Boeing aircraft. ALG has an amazing opportunity for you to be part of our team on a high-paying 6-month contract in the United States of America. At ALG, we offer competitive above-market rates and provide opportunities for overtime. If you're located outside of the United States of America, we'll take care of your flights and accommodation. Requirements: To thrive in this role, our ideal candidates possess the following attributes:<ul><li>Holds CASA or EASA or FAA A&amp;P qualification (B1 or B2).</li><li>Hold type rating on an Airbus or Boeing aircraft.</li><li>Candidates must have pre-existing working rights in the United States of America.</li><li>Line or Heavy Maintenance Experience.</li><li>Willingness to commit to at least 3 months of the project.</li></ul>FAA A&amp;P, EASA, CASA, A380, B787, Engineer, Licenced Aircraft Maintenance Engineer

Licenced Aircraft Maintenance Engineer - Overseas Contract

All About UsThe Maintenance Controller has exposure to the overall airline operation.&nbsp; The controller provides technical oversight and coordinates the repair of aircraft, makes decisions associated with maintaining scheduled operations and works directly with operation side of the Operations Control Center.&nbsp; In addition to providing direction for aircraft maintenance, the position interfaces with other departments in addition to Technical Operations providing a solid understanding of the overall airline operation.&nbsp; &nbsp;&nbsp;All About The Role<ul>
<li>Responsible for timely, economical repair of aircraft using approved procedures</li><li>Ensures proper use of the MEL (Minimum Equipment List) by authorizing MEL deferrals and managing these items for timely closure</li><li>Coordinates with the Operations Control Center the flow of aircraft scheduled to maintenance bases and modifies the daily maintenance schedule in response to unscheduled maintenance events</li><li>Make decisions concerning the course of action required to ensure safe, airworthy aircraft in accordance with regulatory requirements.</li><li>Support the Maintenance Department with troubleshooting and repairs at a variety of locations on an infrequent/ special needs basis</li><li>Ensures notification of management personnel in event of accident, incident, or irregular operation</li><li>Establish and maintain a working relationship with maintenance personnel.</li><li>Other duties as assigned</li><li>Must possess the ability to communicate clearly orally and written</li><li>Must be able to use a personal computer for aircraft maintenance related programs and other information technology software</li><li>Must be able to lift items weighing up to 25 pounds.</li><li>Work is performed in an office environment</li><li>Maintenance Control is a fast paced work environment requiring analytical decisions made in a timely manner</li><li>The operation requires 24 hrs/day, 7 days/week coverage</li><li>Requires contact with staff and business relationships including the FAA</li></ul>
All About You<ul>
<li>High School graduate/GED equivalent</li><li>Must hold a current FAA Airframe and Power Plant certificate</li><li>Minimum of 3-5 years working as an aircraft maintenance technician, lead technician or aircraft maintenance supervisor, 5+ years experience preferred</li><li>Ability to interpret technical manuals and schematics</li><li>Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail</li><li>Must have strong, clear, concise communication skills</li><li>Available to work nights, weekends, holidays or extra hours when necessary</li><li>Must possess valid driver’s license.</li></ul>
Endeavor Air is an equal opportunity employer (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status.High School graduate/GED equivalent
Must hold a current FAA Airframe and Power Plant certificate
Minimum of 3-5 years working as an aircraft maintenance technician, lead technician or aircraft maintenance supervisor, 5+ years experience preferred
Ability to interpret technical manuals and schematics
Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail
Must have strong, clear, concise communication skills
Available to work nights, weekends, holidays or extra hours when necessary
Must possess valid driver's license.

Maintenance Controller

ALG has a great opportunity for a Technical Officer - AME to join a well-established commercial organisation based at Mascot Airport working in their component maintenance shop. The position will give the successful candidate the chance to get hands on exposure and the opportunity to work in a busy environment. The ideal candidate will have experience component experience and have a sound understanding of the supply chain process. This role has a Monday to Friday shift pattern with opportunity for OT. This successful candidate is expected to go permanent with our client within 6-12 months of starting.&nbsp; To be considered, you will require the following:<ul><li>Aviation trade certificate.</li><li>24 months of experience working in a component environment (critical).</li><li>Intermediate IT skills.</li><li>Experience in analysing supply chain stock levels.</li><li>Prior experience placing purchase orders with suppliers.</li><li>Strong aptitude for technical and compliance related work.</li><li>Demonstrated ability to work safely and adhere to all safety requirements.</li><li>High levels of attention to detail.</li><li>Full working rights in Australia.</li><li>Willingness to undergo a full security clearance process.</li><li>Willingness to undergo Drug and Alcohol testing.</li></ul> The successful candidate will receive:<ul><li>Hourly pay rate of $50.50 + Super</li><li>Exposure to working with a leading airline.</li><li>OJT training.</li><li>Monday to Friday (Day shift) work roster (consistent hours).</li><li>No end date in the contract.</li><li>Ability to convert to a permanent role with our client.</li></ul>AME, Aircraft maintenance Engineer, Inventory Management, Stocktake, quality control, aviation, Purchase Officer, Quality Inspector, Pick Packer.

28 Technical and engineering Permanent Jobs