field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

At Base Maintenance, our expert engineers deliver unparalleled service for all aircraft checks, from comprehensive inspections to major system repairs. We handle cabin retrofits, aircraft deliveries, and detailed inspection programs for Airbus A380, A350 and Boeing 777.Our team excels in timely, cost-effective solutions for A &amp; C checks, engine change, and landing gear changes, along with unscheduled maintenance and pre-service checks.&nbsp;As a Licensed Aircraft Engineer (LAE), you will perform maintenance tasks on Emirates aircraft in line with approved procedures, safety standards, and regulatory requirements. You’ll work within a skilled team of Engineers and Technicians to ensure reliability, airworthiness, and operational excellence.In this role you will:&nbsp;<ul><li>Perform maintenance and servicing tasks in accordance with manufacturer documentation and safety regulations.</li><li>Ensure personal licences and approvals are valid for assigned aircraft types.</li><li>Manage off-aircraft tasks including spares handling, robberies, and hold items, ensuring full compliance and documentation.</li><li>Conduct component changes and troubleshooting using approved manuals and tooling.</li><li>Maintain rigorous safety standards, report deficiencies, and uphold excellent housekeeping practices.</li><li>Communicate effectively with team members and management to identify and resolve operational issues.</li><li>Complete detailed reports for service delays, incidents, and accidents.</li><li>Oversee and review staff performance, ensuring SMART goal setting and development planning.</li><li>Attend recurrent training to maintain compliance with CAR 145 requirements.</li><li>Be available for deployment across Emirates operations, including AOG recovery, outsourced maintenance supervision, and aircraft acceptance.</li></ul>QualificationTo be considered for the LAE role you must meet the following requirements:Licensed Aircraft Engineer TE.03<ul><li>Degree/Honors (12+3) in Aeronautical, Mechanical, Avionics, Electronic, or Technical Engineering, or a Maintenance Engineering Licence.</li><li>Minimum 10 years of Engineering experience, with 5+ years as certifying staff.</li><li>Minimum of 2 aircraft type approvals with at least one of the Emirates aircraft types (A380, A350, or B777).</li><li>Preferred GCAA, UK CAA or EASA license eligible for conversion.</li></ul>Licensed Aircraft Engineer TE.02<ul><li>Degree/Honors (12+3) in Aeronautical, Mechanical, Avionics, Electronic, or Technical Engineering, or a Maintenance Engineering Licence.</li><li>Minimum 8 years of Engineering experience, with 2+ years as certifying staff.</li><li>Minimum of 2 aircraft type approvals with at least one of the Emirates aircraft types (A380, A350, or B777).</li><li>Preferred GCAA, UK CAA or EASA license eligible for conversion.</li></ul>Safety Sensitive role: Yes&nbsp;Salary &amp; BenefitsJoin us in a management role and enjoy an attractive tax-free salary. On top of our generous travel benefits, including discounted flights and hotel stays around the world, this managerial role also has an excellent leave and healthcare package. That’s on top of transport benefits, life insurance and more.

Emirates

Emirates Pilots

Licensed Aircraft Engineer - Manchester (Role based in Dubai, UAE)

Your daily tasks &amp; responsibilities<ul><li>As part of the Systems Engineering Team you design installations and modifications with focus on aircraft cabin noise reduction</li><li>Support the in-house acoustic laboratory with selection of equipment, development and implementation of standards and test procedures</li><li>Ensure adequate communication and liaison internally, especially within the Design Organization, with Production and Maintenance and with external partners and suppliers</li><li>Support the Team Leader Mechanical Design Engineering in administrative and organizational tasks</li><li>Ensure correct consideration and application of Certification Basis, Rules and Regulations, Means of Compliance and Interpretations in the engineering output for the product, system or installation designed</li></ul>Main Activities<ul><li>Conduct in-house tests of materials and assemblies</li><li>Preparation of technical documentation such as reports, analysis, test procedures and installation instructions</li><li>Support designs with acoustic analysis and calculations</li><li>Preparation of mechanical drawings (2D/3D-CAD)</li><li>Support and perform noise measurement ground and flight tests</li><li>Resolve installation process and noise treatment issues; provide recommendation for enhancements</li><li>All other duties assigned</li></ul>The expertise you have &amp; skills you bring&nbsp;<ul><li>Engineering Degree in Acoustic Engineering, Mechanical Engineering, Aeronautical Engineering or relevant field</li><li>Profound knowledge of the principles of sound and vibration</li><li>Ideally 3+ years of experience in an acoustic engineering role</li><li>Proactive Teamplayer with excellent written and verbal communication skills in English - additionally French and/or German is advantageous</li><li>Proficient in MS Office and popular 2D/3D design software</li><li>Must show high initiative, be self-motivated, and have ability to act independently on technical matters, manage time effectively</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>Additional information<ul><li>General working place: Hangar Facilities at EuroAirport Basel-Mulhouse-Freiburg</li></ul>

AMAC Aerospace Switzerland AG

AMAC Aerospace

Acoustic Engineer – Aircraft Cabins

Key Aspects of the Activity<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non routine task cards</li><li>Performance of related operational tasks</li><li>Perform daily / weekly checks as required</li><li>Perform pre-flight and post-flight inspections</li><li>Review and carry out necessary actions to rectify flight problems</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li></ul> Required Skills and Qualifications<ul><li>5 years practical experience of base maintenance on Boeing</li><li>Holder of EASA Part-66 Cat B1</li><li>B737, B747, B757, B767, B777, B787 rating with minimum 3 years experience as Certifying Staff on aircraft type</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Experience in Corporate Aviation is an advantage</li><li>Fluent in English</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

B1 EASA Licensed Aircraft Engineer Boeing

Position and Responsibilities<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non-routine task cards</li><li>Performance of related operational tasks</li><li>Advanced trouble shooting experience</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li></ul> Required Skills and Qualifications<ul><li>5 years practical experience of base maintenance on Airbus types</li><li>Holder of EASA Part-66 Cat B1.1 License</li><li>A320 Family, and/or &nbsp;A330/340/A350 rating with minimum 3 years’ experience as Certifying Staff on aircraft type</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Experience in Corporate Aviation is an advantage</li><li>Fluent in English</li><li>Willing to re-locate to Basel area</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

B1 EASA Licensed Aircraft Technician Airbus

Position and Responsibilities<ul><li>Ensure that Certification Basis is appropriate for the product, system or installation and that all applicable rules, regulations, Means of Compliance and interpretations are applied correctly.</li><li>Ensure adequate communication and liaison internally and with external Third Parties.</li><li>Act as Certification Engineer.</li></ul>Main Activities<ul><li>Internal and external coordination of certification-activities for outfitting- and modification-projects between Office of Airworthiness, Compliance Verification Engineers, Engineering Department and Third Parties such as Air Authorities, Sub-Contractors, DERs</li><li>Preparation of certification documentation and certification supporting documentation such as Certification Plan, Certification Compliance Sheets, Master Data List, Classification of Design Changes, STC-Application</li><li>Perform reviews of technical A/C documentation and coordination-activities for A/C operational aspects such as registration changes, import and export of A/C, compliance to JAR OPS 1 (EU OPS)</li><li>Support the Head of Design Organisation, Chief of Office of Airworthiness and the Office of Airworthiness in administrative and organisational aspects</li></ul>Required Skills and Qualifications<ul><li>Qualification as a Senior Engineer, i.e. several years of education and experience in the fields of aviation engineering and design.</li><li>Engineering specialist in one of the mentioned disciplines (Electric/Avionic/Systems/Mechanic)</li><li>Experience in the various approval procedures would be appreciated&nbsp;(EASA Part 21 / CS / JAR / FAR).</li><li>Computer literate with MS Office software (Word, Excel, Power Point)</li><li>Good communication skills in English; German or French in addition will be an advantage.</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul>

Certification Engineer

Position and Responsibilities<ul><li>As part of the Systems Engineering Team you lead a group of professional engineers</li><li>Design system modifications with focus on Environmental Control System (ECS), Supplemental Heating, Air Cleaning, Equipment Cooling, Cabin Humidification, Soundproofing, Oxygen, Smoke-Detection and Water/ Waste including associated modifications on aircraft internal and external primary and secondary structure and interior furnishing</li><li>You ensure correct consideration and application of Certification Basis, Rules and Regulations, Means of Compliance and Interpretations in the engineering output for the product, system or installation designed</li><li>Ensure adequate communication and liaison internally, especially with the Engineering Team as well as with external Third Parties</li><li>You report to the Manager Mechanical Design Engineering - Systems</li><li>You support the Manager Mechanical Design Engineering - Systems in administrative and organizational tasks</li></ul>Key Aspects of the Activity<ul><li>Coordinate the daily engineering activities within your group</li><li>Support the Manager with work load planning and specific target dates</li><li>Check man-hours and material-budgets of ongoing projects</li><li>Preparation and checking of technical documentation such as reports, analysis, test procedures and installation instructions</li><li>Development of Mechanical Drawings (2D/3D-CAD)</li><li>Selection of equipment, components and materials</li><li>Preparation of engineering design standards</li><li>Additional tasks assigned by the Engineering Management</li></ul>Required Skills and Qualifications<ul><li>Engineering Degree in Mechanical Engineering, Aeronautical Engineering or relevant field</li><li>Minimum three years job experience in a leading position</li><li>Profound knowledge of fundamental physics, fluid mechanics, thermodynamics, aerospace technology and materials - basic knowledge of acoustics is advantageous</li><li>Proactive Teamplayer with excellent written and verbal communication skills in English - additionally French and/or German is advantageous</li><li>Proficient in MS Office and popular 2D/3D design software (AutoCad, CATIA, Solidworks)</li><li>Ability to manage time effectively</li><li>Ability to work independently</li><li>Accurate and strong attention to detail and safety</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

Group Leader – Systems Engineering

Your daily tasks &amp; responsibilities<ul><li>Lead and organize a skilled base maintenance team with the aircraft supervisor</li><li>Act as certifying staff to release aircraft into service and perform double inspections</li><li>Review and perform troubleshooting, testing, implementation, and maintenance activities according to AMAC MOE procedures</li><li>Assist in ordering necessary tools and ground support equipment Promote AMAC</li><li>Coordinate scheduled and unscheduled maintenance requirements</li><li>Liaise the status and condition of the aircraft systems during the maintenance activities against the relevant departments</li><li>Ensure all maintenance activities comply with regulations and are well-documented</li><li>Obey and promote actively the AMAC Aerospace AG Safety and Quality Policy</li></ul>The expertise you have &amp; skills you bring&nbsp;<ul><li>3-5 years practical experience of base maintenance</li><li>Holder of EASA Part-66 Cat B1/C with minimum one of the following type ratings</li><li>Boeing 737 / 747 / 777 / 787 with experience as Certifying Staff</li><li>Experience in a leader position would be of advantage</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience desirable</li><li>Good communication skills</li><li>Highly motivated and willingness to take initiative</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Fluent in English</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

Leader Aircraft Maintenance – Boeing

Your daily tasks &amp; responsibilities<ul><li>Performance of routine and non-routine task cards</li><li>Performance of related operational tasks</li><li>Troubleshoot, repair, inspect and rectify aircraft faults</li><li>Perform and record all work performed in accordance appropriate manuals and regulations</li><li>Work away from home base to support customers during AOG</li></ul>The expertise you have &amp; skills you bring&nbsp;<ul><li>Holder of European EASA Part-66 Cat B2</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Awareness of highest standard in terms of quality, reliability and safety</li><li>Fluent in English</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Aircraft type rating once competence is proven</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>Additional information<ul><li>General working place: Hangar Facilities at EuroAirport Basel-Mulhouse-Freiburg</li></ul>

B2 EASA Licensed Avionics Engineer

Position and responsibilities:<ul><li>Strong experience in civil aircraft engine</li><li>Participate in and develop reporting process of our power plant and nacelle</li><li>Lead to solve designated technical issues of our aircraft’s power plant system</li><li>Develop communication process with the different engine manufacturer</li><li>Read and interprets manufacturers maintenance manuals, service bulletins and other specifications to determine feasibility and methods of repair</li></ul>Required skills and qualifications:<ul><li>Good English level / French or German of advantage</li><li>Minimum of 5 years’ experience on engine shop level</li><li>Borescope experience/approval</li><li>Able to perform troubleshooting and maintenance work</li><li>Able to issue reports and communicate with the different engine manufacturers</li><li>EASA B1 Licensed or Swiss “S” licensed of advantage</li></ul>Ideally experienced on following engine types but not limited to:<ul><li>GE CF6 series</li><li>GE 90 series</li><li>GE CF34 series</li><li>Pratt &amp; Whitney PW 4000</li><li>CFM 56-5A/-5B/-5C/-7</li><li>CFM LEAP 1A</li><li>RR RB211 Trent 700</li><li>RR RB211 Trent 500</li><li>Pratt &amp; Whitney 1100G</li><li>IAE V2500</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young and dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like at least 5 weeks of holidays</li><li>A workplace in the middle of the city of Basel and various employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>Corporate events like our summer BBQ and the famous annual Christmas Party</li></ul> Additional information<ul><li>General working place: Hangar facilities at EuroAirport Basel-Mulhouse-Freiburg</li></ul>

Engine Specialist

Position and Responsibility<ul><li>Act as Electrical/Avionic Design Engineer – designing cabin related and avionics systems.</li><li>Support her/his superiors in developing below listed systems` design:</li><li>Environmental control (air-conditioning, heating, humidification)</li><li>In-flight entertainment, cabin management</li><li>Communication and computer networks (Telephony, GSM, LAN/WLAN)</li><li>Satellite communication, High-speed Data, Satellite TV</li><li>Power generation, supply and distribution</li><li>Galleys, seats, interior doors, window shades</li><li>Smoke detection and passenger oxygen</li><li>Water System</li><li>Cabin Basic Lighting System</li><li>Emergency Lighting System</li><li>Work independently on system designs</li><li>Modify &amp; Commission and test of electrical/avionic systems on Transport Category Aircraft for cabin completion and modification projects</li></ul>&nbsp; Key Aspects of the Activity<ul><li>Preparation of System-Specification and Service-Definitions</li><li>Support to project preparation (i.e. Request for Quotation, Order Description, Material Orders)</li><li>Preparation of Layout Drawings, Block Diagrams, Wiring Diagrams, Item Lists,&nbsp;Wire Lists, Drawings Lists and handling of related ECO and PCR</li><li>Preparation of Installation Instruction and Documentation (i.e. EO, SB)</li><li>Preparation of Ground- , Flight Checks and Test Procedures</li><li>Preparation of Compliance Documentation, Reports &amp; Analysis regarding</li><li>Equipment Qualification, Wire-Routing and Installation, Safety and Hazard&nbsp;Assessments</li><li>Administration of Vendor Information and Manuals</li><li>Liaison and cooperation with Avionic &amp; Electrical Services Department</li><li>Liaison and cooperation with Office of Airworthiness, Mechanical Production</li><li>Engineering and Mechanical Design Engineering</li><li>Liaison and cooperation with Vendors and Supplier of parts, components and&nbsp;avionic/electrical systems and Test-Facilities</li><li>Selection of equipment, components, materials</li><li>Development of electrical wiring diagrams (Visio)</li><li>Preparation of ground-and flight-test procedures</li><li>Develop technical and safety and certification documentation (reports, analysis, assessments)</li><li>Develop engineering standards</li></ul>Required Skills and Qualifications<ul><li>Applicable Electronic/Electrical Engineering degree or similar qualification required</li><li>Aviation Experience &amp; Design Engineering experience would be advantageous</li><li>Minimum 3 years’ experience</li><li>MS Office (Visio, Word, Excel, Power Point) and CAD literacy</li><li>Good communication skills in English, German and/or French advantageous</li><li>Good at time management</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

16 Technical and engineering Permanent Jobs