field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

Job Description

• Formulate a flight plan 
• Conduct all pre-flight checks to ensure safety 
• Communicate with air traffic control to request for landing and take-off, or report any information on the flight plan. 
• Check all the cockpit instruments to ensure proper functioning. 
• Observe the weather conditions, aircraft position, and air traffic regularly during the flight and request for a change of flight plan if needed. 
• Collaborate with flight attendants to ensure passengers are following all the rules and regulations onboard. 
• File reports of the flight trip and status of aircraft before and after landing.
Requirements

1. Flight time requirements (minimum): 
• All Aircraft: 2,000hrs 
• A320F: 1,500hrs 
*For candidates with valid CAAV license and experience operating in Vietnam, concession for flight time requirement shall be granted if candidates pass all screening steps. Candidates shall be requested to pass a extra training and an hour-building program until reaching flight time requirements. 
 
2. General requirements: 
• Maximum age 60 (Male) and 55 (Female) 
• Valid ATPL with current A320F type rating 
• Certificate of Upset Recovery Training in Full Flight Simulator 
• Valid Instrument Rating and Aircraft Rating 
• Last flight on A320F must be within 06 months during the licensing period 
• Valid Class 1 Medical 
• Letter of authentication from the Civil Aviation Authority of CPL/ATPL's country of origin (with Name and email address of CAA Licensing Officer) 
• Recommendation Letter / Release Letter from previous airlines 
• Criminal Record within 6 months (notarized by Vietnam embassy from country of origin) 
• No history of Accident / Incident within 5 years 
• Last 5 pages of logbook 
• ICAO English Level 4 or higher 
• Passport scan with 01-year validity

A320/321 First Officer

Job Description

• Formulate a flight plan 
• Conduct all pre-flight checks to ensure safety 
• Communicate with air traffic control to request for landing and take-off, or report any information on the flight plan 
• Check all the cockpit instruments to ensure proper functioning 
• Observe the weather conditions, aircraft position, and air traffic regularly during the flight and request a change of flight plan if needed 
• Collaborate with flight attendants to ensure passengers are following all the rules and regulations onboard 
• File reports of the flight trip and status of aircraft before and after landing
Requirements

1. Flight time requirements (minimum): 
• All Aircraft: 4,000hrs 
• PIC Multicrew: 1500hrs 
• A320F: 1500hrs with 
• PIC on A320F: 500 hrs (excluding PICUS hours) 
2. General requirements: 
• Maximum age 60 (Male) and 55 (Female) 
• Valid CAAV ATPL with current A320F Type Rating 
• Certificate of Upset Recovery Training in Full Flight Simulator 
• Valid Instrument Rating and Aircraft Rating 
• Last flight on A320F must be within 12 months during the licensing period 
• Valid Class 1 Medical 
• Letter of authentication from the Civil Aviation Authority of CPL/ATPL's country of origin (with Name and email address of CAA Licensing Officer) 
• Recommendation Letter / Release Letter from previous airlines 
• Criminal Record within 6 months (notarized by Vietnam embassy from country of origin) 
• No history of Accident / Incident within 5 years 
• Last 5 pages of logbook 
• ICAO English Level 4 or higher 
• Passport scan with 01-year validity

A320/321 Captain

Production Planner / Material Planner Location: Farnborough (4 days on-site) Hours: 37 hours per week Contract: Until 30/06/2026 (with potential for extension or permanent placement) Rate: £24.66/hour PAYE | £33.00/hour Umbrella Security Clearance: BPSS+ (completed by client)Our Client is a pioneering force in aerospace innovation, developing cutting-edge High Altitude Platform Station (HAPS) technology. Their solar-electric aircraft operates at over 60,000 feet, offering ultra-long-endurance connectivity and Earth observation capabilities from the stratosphere.They are seeking a Production Planner / Material Planner to join their dynamic manufacturing operations team. This is a fantastic opportunity to contribute to a world-leading aerospace programme and be part of a visionary team shaping the future of stratospheric flight.Key Responsibilities:Production Planning &amp; Scheduling<ul><li>Develop and maintain production schedules aligned with customer demand and resource availability.</li><li>Manage production orders and material requisitions using ERP systems (D365).</li><li>Monitor capacity and adjust schedules to meet deadlines.</li></ul>Inventory Management<ul><li>Track inventory levels and coordinate material movement to avoid shortages or excess.</li><li>Use MRP tools to ensure timely procurement of parts and materials.</li></ul>Data Analysis &amp; Reporting<ul><li>Generate reports to monitor KPIs such as delivery performance and inventory turnover.</li><li>Analyse demand trends to forecast future production needs.</li></ul>Cross-Functional Collaboration<ul><li>Liaise with engineering, procurement, and quality teams to ensure material compliance.</li><li>Communicate production status and constraints to management.</li></ul>Continuous Improvement<ul><li>Identify process improvements to enhance efficiency.</li><li>Participate in lean manufacturing initiatives.</li></ul>Ideal Skills/Experience<ul><li>Minimum 5 years' experience in production/material planning within a project-based manufacturing environment.</li><li>Strong analytical and problem-solving skills.</li><li>Proficient in Microsoft Excel and ERP systems (preferably D365).</li><li>Familiarity with aerospace manufacturing standards (e.g., AS9100, FAA).</li><li>Engineering industry background preferred.</li></ul>If you think this could be a new and exciting career opportunity for you and you would like to learn more or just for an initial, no-obligation conversation please contact me on 07732 694 243 or you can apply directly by following the Easy Apply link and I will contact you as soon as I receive your contact details.This vacancy is being advertised by Belcan Production, Material, Manufacturing

Production Planner 

Business Controller / Management Accountant Location: Belfast (Hybrid - up to 2 days WFH per week after training) Contract: 12 months (with potential for extension) Rate: Up to £46.82/hr Umbrella | Up to £35/hr PAYE (DOE) Start Date: Expected 1st October (subject to project go-live)Our Client, a leading organisation in the aviation and manufacturing sector, is seeking a Business Controller / Management Accountant to join their dynamic finance team in Belfast. This is a fantastic opportunity to contribute to a high-value business unit, supporting strategic financial planning and performance improvement initiatives.Key Responsibilities:<ul><li>Lead the annual budget and quarterly forecast processes across business units.</li><li>Partner with operational managers to identify and validate improvement projects.</li><li>Deliver timely and accurate financial reporting to both local and central teams.</li><li>Provide financial insight and challenge to drive operational performance.</li><li>Support investment and performance improvement proposals with robust financial analysis.</li><li>Control financial activities across Recurring Cost, Inventory, Non-Recurring Cost, and Capex (as required).</li></ul>Essential Skills &amp; Experience:<ul><li>Qualified Accountant (CIMA preferred) with minimum 2 years post-qualification experience in a manufacturing or commercial environment.</li><li>Proficient in SAP or similar financial reporting tools.</li><li>Strong analytical and communication skills, with the ability to engage stakeholders across multiple levels and geographies.</li><li>A proactive, continuous improvement mindset and collaborative team approach.</li></ul>If you think this could be a new and exciting career opportunity for you and you would like to learn more or just for an initial, no-obligation conversation please contact me on 07732 694 243 or you can apply directly by following the Easy Apply link and I will contact you as soon as I receive your contact details.This vacancy is being advertised by Belcan CIMA, SAP

Management Accountant

Join easyJet Engineering &amp; Maintenance as we expand operations with an additional hangar facility at London Luton Airport.

easyJet’s Engineering and Maintenance team is known across the industry for its innovative, solution driven approach. With a proud reputation for delivering Europe’s highest technical dispatch reliability recognised by Airbus you’ll be part of a dynamic team working at the heart of our airline’s operation.

What you’ll be doing:

You will perform aircraft maintenance tasks as directed by the Maintenance Supervisor or Certifying Licensed Engineer, ensuring all work requiring a Certificate of Release to Service (CRS) is completed per the MOE, EASA Requirements, and NAA regulations. You will be fully conversant with accomplishing allocated tasks and seek guidance for unfamiliar areas. A thorough verbal handover of any partially completed tasks is required, ensuring documentation is completed as far as possible. You will report any defects or safety risks to the Maintenance Supervisor or Base Manager, adhere to all safety precautions and procedures, comply with health and safety requirements, and ensure that all facilities, tools, and equipment are satisfactory for the tasks. Compliance with Station Standing Instructions and accepting other duties and responsibilities as reasonably requested are also essential. Additionally, you will carry out all scheduled tasks assigned by the Maintenance Supervisor in accordance with approved maintenance documentation.

What you’ll need to do the role:

Candidates will demonstrate an up-to-date knowledge of applicable airworthiness legislation and ideally hold a time-served apprenticeship with operational experience in a hangar maintenance environment. A high degree of customer focus, both internal and external, is essential. The candidate must be able to work effectively in a team at all levels of the organisation and show a willingness to be flexible to meet deadlines and overcome operational problems. Demonstrating a working knowledge of Health &amp; Safety Legislation and technical knowledge of aircraft, along with the hand skills required to carry out tasks, is crucial. Additionally, the ability to use aircraft maintenance documentation and computer-based reporting and recording systems is required.


&nbsp;


Requirements of the Role

<ul>
	<li>What you’ll get in return</li>
	<li>Competitive base salary</li>
	<li>Up to 20% bonus</li>
	<li>25 days holiday</li>
	<li>BAYE, SAYE &amp; Performance share schemes</li>
	<li>5% pension</li>
	<li>Life Assurance</li>
	<li>Flexible benefits package</li>
	<li>Excellent staff travel benefits</li>
</ul>

Location &amp; Hours of Work

This full-time role will be based in Luton working permanent nights, 10.75-hour shifts. Shift pattern is a 28 day roster pattern, with occasional travel requirements to easyJet’s headquarters or network locations.

About easyJet

Ready to make your next move? How about make your mark? Join a team with unstoppable drive and passion at easyJet.

At easyJet our aim is to make low-cost travel easy – connecting millions of people to what they love using Europe’s best airline network, great value fares, and friendly service. Whether you’re working as part of our front-line operations or in our corporate roles, we’ll give you everything you need to make a personal impact on our growing business. We believe in sharing new opportunities, stepping up to challenges and supporting each other with our Orange Spirit.

Make a difference with your next role. Make it easyJet.


&nbsp;

Mechanic

All About UsThe Aircraft Maintenance Technician (AMT) is responsible for maintenance and repairs to keep aircraft working safely and efficiently.All About The Role<ul>
<li>Responsible for the maintenance and preventive maintenance of aircraft, components and equipment.</li><li>Determine airworthiness of aircraft and components, in accordance with established procedures and Federal Aviation Regulations.</li><li>Service and inspect aircraft, components and related equipment.</li><li>Perform aircraft jacking, lifting, towing, and manual movement.</li><li>Operate and inspect powered and non-powered ground equipment.</li><li>Perform structural repair, inspects and identifies for prevention and repair.</li><li>Complete aircraft maintenance forms entries and enters data into the Maintenance Data System, ensures entries are accurate and complete.</li><li>Responsible to maintain a clean and orderly work area.</li><li>Demonstrate behavior in accordance with Endeavor Air Code of Conduct in all Company business dealings and decisions.</li><li>Demonstrate a high level of focus on customer service.</li></ul>
All About You<ul>
<li>High School Diploma, GED, or equivalent</li><li>Must hold a valid Airframe and Power Plant (A&amp;P) Mechanics license</li><li>Professional work experience in aviation maintenance field preferred</li><li>Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail</li><li>Strong work ethic, reliable, self-motivated with a positive attitude, and customer service oriented</li><li>Ability to travel internationally with the ability to hold a passport required within 3 months of hire; passport expenses are paid for by the employee</li><li>Ability to read, write, speak and understand English</li><li>Must possess a valid driver's license and if position requires use of company vehicle(s), must be insurable under company insurance coverage</li></ul>
Endeavor Air is an equal opportunity employer (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status.High School Diploma, GED, or equivalent
Must hold a valid Airframe and Power Plant (A&amp;P) Mechanics license
Professional work experience in aviation maintenance field preferred
Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail
Strong work ethic, reliable, self-motivated with a positive attitude, and customer service oriented
Ability to travel internationally with the ability to hold a passport required within 3 months of hire; passport expenses are paid for by the employee
Ability to read, write, speak and understand English
Must possess a valid driver's license and if position requires use of company vehicle(s), must be insurable under company insurance coverage

Aircraft Maintenance Technician - LGA

Project LeaderLocation:Broughton (Onsite Requirement) Contract Duration: Until 06/10/2026 (with potential for extension) Pay Rates:Umbrella: £29.44 per hour / PAYE: £22.00 per hour Hours: 35 hours per week (4.5 days between 7am - 7pm, flexible within business needs)IR35 Status: Off-payroll working rules apply Security Clearance: BPSS+ (to be completed by client security team) Interview Process: One-stage onsite interviewAbout the RoleOur Client is seeking an experienced Enablement Support/Project Leader professional to lead and deliver strategic improvements within a repurposed production facility. This role is pivotal in supporting the transformation of a former factory into a Single Aisle production site.You will be responsible for driving enablement initiatives, implementing new ways of working, and exploring external tooling solutions to enhance sustainability and operational efficiency. This is a hands-on leadership role requiring strong stakeholder engagement and project management capabilities.Key Responsibilities<ul><li>Lead enablement for the old factory through best practices and innovative working methods.</li><li>Develop and implement an enablement governance framework in collaboration with the Plant Capex team.</li><li>Identify and integrate new technologies and tooling solutions to support sustainability goals.</li><li>Provide leadership and development for Enablement teams.</li><li>Oversee daily tool control processes and LOLER management.</li><li>Drive FOD (Foreign Object Debris) improvement initiatives.</li><li>Ensure compliance with EHS and Airworthiness standards.</li><li>Champion the SQCDP (Safety, Quality, Cost, Delivery, People) process to identify and implement improvements.</li></ul>Ideal Candidate Profile<ul><li>Proven experience in aviation, production, or manufacturing environments.</li><li>Strong facilitation and leadership skills.</li><li>Excellent stakeholder management and conflict resolution abilities.</li><li>Comfortable managing change and driving continuous improvement.</li><li>Experience over formal qualifications are preferred.</li><li>Familiarity with project delivery to cost, timescales, and quality standards.</li></ul>If you think this could be a new and exciting career opportunity for you and you would like to learn more or just for an initial, no-obligation conversation please contact me on 07732 694 243 or you can apply directly by following the Easy Apply link and I will contact you as soon as I receive your contact details.This vacancy is being advertised by Belcan LOLER, FOD, Enablement, Business Improver

Project Leader

For more than 20 years, Global Jet Luxembourg, leading European company in aircraft management, is focused on providing a high quality of service to an exceptional clientele. Serving entrepreneurs, business leaders and high net worth individuals who travel the world is a challenge our dedicated employees revel in every single day. We select candidates based on their expertise and qualifications, but also on their attitude, philosophy and interpersonal skills. To meet the needs of our constantly growing company, we are looking for a First Officer on Falcon 2000. <ul><li>Experience on the Type preferred</li><li>Type rating not mandatory</li><li>Min. 1500h on Jet required</li><li>Valid EASA license</li><li>Paris based</li><li>French speaking is mandatory</li><li>20/10 roster</li><li>No history of accidents nor incidents</li><li>No criminal records and non-security restrictions</li></ul> If you are a highly motivated and skilled pilot looking for an exciting opportunity to join our team, please submit your application through our website. Please note that all application will be treated confidentially.

First Officer Falcon 2000 - Paris Based

For more than 20 years, Global Jet Luxembourg, leading European company in aircraft management, is focused on providing a high quality of service to an exceptional clientele. As a VIP Flight Attendant, you are to ensure the highest level of service, safety and security for our passengers. This position calls for service orientated candidates willing to attend on VIPs anywhere they fly following the company philosophy. <ul><li>Deliver personalized and high-quality service to VIP clients on board</li><li>Ensure the safety and security of all passengers during flights</li><li>Assist passengers with boarding, disembarking, and any special requests</li><li>Provide in-flight services such as meal and beverage service, amenity distribution, and entertainment assistance</li><li>Maintain a clean and organized cabin environment</li><li>Collaborate with the flight crew to ensure smooth operations and excellent customer experience</li></ul> <ul><li>Prior experience as a Cabin Crew member, preferably in a VIP or luxury aviation environment</li><li>Proven experience in VVIP service</li><li>India based mandatory</li><li>Experience on Global 6500 / Global 7500 aircraft</li><li>Expertise in wine and mixology</li><li>Excellent customer service, interpersonal and communication skills</li><li>Energetic, empathetic, and humble individual with a positive and professional attitude Please note that all application will be treated confidentially.</li></ul>

VIP Flight Attendant - India based

Westair Aviation (Pty) Ltd has the following vacancy available and invites all suitably qualified candidates to apply efore or on 31 October 2025. We are seeking skilled and experienced pilots to join our team. As a pilot, you will be responsible for safely operating our aircraft and ensuring the comfort and safety of passengers and crew. Responsibilities: • Operate aircraft in compliance with all relevant regulations and safety standards. • Conduct pre-flight inspections and review flight plans and weather conditions. • Communicate with air traffic control and navigate during flights. • Perform take-offs and landings, managing aircraft systems and controls. • Respond to emergency situations and take necessary actions to ensure safety. • Collaborate with co-pilots, cabin crew, and ground personnel for smooth flight operations. • Maintain accurate records of flight activities and comply with reporting requirements. • Participate in ongoing training and professional development. Captain: ERJ 135/145 Requirements: • Valid ATPL License; • ERJ 145/135 Rating is a requirement; • Minimum 3000 hours Total Time; • P1 on the ERJ with minimum 500 hours PIC; • Minimum 2500 Total PIC on Multi Engine Turbine / Jet Aircraft; • Willing to travel for extensive periods (6-12 weeks) (Africa); • Preference will be given to Namibian Citizens. First Officer: ERJ 135/145 Requirements: • Valid SACAA or NCAA CPL/ATPL License; • ERJ 145/135 Rating is a requirement; • Minimum 2000 hours Total Time; • Minimum 100 hours on type; • Minimum 1000 hours on Multi Engine Turbine; • Willing to travel for extensive periods (6-12 weeks) (Africa); • Preference will be given to Namibian Citizens. Only shortlisted candidates will be contacted. The Westair Group of Companies is an equal opportunity employer.

307 Jobs