field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_flight_regions

aviationcv_job_recency

Finnair is a diverse community of professionals who work ambitiously with a big heart and commitment. A strong safety culture is our priority and at the core of our everyday work, never taking it for granted. We are committed to doing our share in solving the climate challenge by determinedly following our science-based pathway to decarbonize our operations. We find meaning in our purpose: to enrich lives by bridging the world, and our identity and service mindset stems from our iconic brand's Nordic heritage. Our values - Commitment to care, Working Together, Simplicity and Courage - guide us in everything we do. Finnair Technical Operations is responsible for the airworthiness of Finnair fleet. The key objectives of Technical Operations are safety, reliable flight operations and cost-efficient maintenance processes. All maintenance actions are controlled from the Maintenance Control Center (MCC). We are now looking for three 24/7 MAINTENANCE ENGINEERS to join our MCC team. Key functions are to ensure the defect control and analyze the fleet continuously. Defect rectification is done in compliance with the company's economic and quality standards, as well as the authority requirements. We are looking for experienced aircraft maintenance professionals with type ratings in at least one of the following Finnair fleet aircraft types: A32S, A330, A350, E190. This is a permanent full-time position, and it has a probation period of 6 months. The collective agreement for this position is FT/05. The main responsibilities include: <ul><li>Receiving defect reports during operation (PIREPS, CAREPS, MAREPS) and entering defects into the maintenance system</li><li>Performing 24/7 aircraft defect control to maintain operational fleet reliability</li><li>Supporting the generation of average non-routine workload estimation for planning purposes</li><li>Defining the required actions, instructions and material for all critical defects and for defects arising during operation</li><li>Assisting in the prioritization of defect repairs</li><li>Acting as centralized troubleshooting support for entire fleet</li></ul> Our expectations: <ul><li>To be Certified Staff in aircraft maintenance</li><li>Good knowledge in aircraft technology and the maintenance environment</li><li>Very good communication and cooperation skills</li><li>Ability for strategic work and good skills to develop the area of responsibilities</li><li>Basic office tool skills</li><li>Proven ability to function under pressure</li><li>Fluency in Finnish and English, both spoken and written</li><li>Readiness to work in shifts</li></ul> Working at Finnair: We offer you an exciting opportunity to work in the fast-changing aviation and international travel industry in a culture that drives and enables professional development and continuous improvement. You will be supported by internally highly rated supervisory work with modern leadership practices that we constantly develop. We are happy to enable our employees to enrich their lives and fulfill their travel dreams by offering a wide leisure travel benefit. We also support the health and wellbeing of our employees through our own Sickness Fund insurance benefit, Epassi sport, culture, wellbeing or commuting benefit, gyms around the Finnair campus and activities organized by our hobby clubs. Are you ready for the challenge and want to join our team? Submit your application with your CV and salary expectation no later than Monday, 31 March 2025. Please note that the hiring process includes a pre-employment security clearance, a pre-employment medical examination and a drug test. For more information, please contact Jarkko Pankamo (Manager, Maintenance Control) by phone +358 50 3926 208. Please note that we do not process applications submitted via email. Our people are key to our success and the foundation that makes Finnair unique. We are committed to creating a safe work environment where all our people can thrive and succeed. We cherish diversity and strive to employ people with different backgrounds and experiences, to bring together multiple views to foster our business success. According to our employee survey, respecting diversity is at a high level in our work community. You are welcome to join Finnair as your authentic self.

Maintenance Engineer

Main Duties &amp; Responsibilities:

<ul>
	<li>Assist in preparing and issuing Engineering Orders (EOs), Repair Work Instructions (RWIs), and Airworthiness Directive Assessments (ADAs).</li>
	<li>Support evaluations of aircraft interiors and structures as part of work packages for various aircraft types.</li>
	<li>Engage with OEMs, STC Providers, and Design Organization Approval holders (DOA) to resolve technical issues and modifications.</li>
	<li>Work closely with production teams to implement modifications, upgrades, and repairs.</li>
	<li>Gain hands-on experience in aircraft structures, materials, and technical documentation.</li>
	<li>Learn how to analyze technical data, assess safety regulations, and ensure compliance with airworthiness standards.</li>
</ul>

Qualifications, Knowledge &amp; Experience:

<ul>
	<li>Bachelor’s degree in Aeronautical Engineering.</li>
	<li>Fresh graduates are encouraged to apply.</li>
	<li>Basic knowledge of EASA, FAA, and CARC regulatory requirements is a plus.</li>
	<li>Familiarity with ERP systems, AutoCAD, and Microsoft Office is advantageous.</li>
	<li>Strong problem-solving, analytical, and communication skills.</li>
	<li>Eagerness to learn, grow, and work in a dynamic aviation environment.</li>
</ul>

Aeronautical Engineer - Interior & Structure

Responsibilities:

<ul>
	<li>Perform a regular inspection on company facilities to ensure the maximum availability, serviceability and reliability.</li>
	<li>Enhance safety measures within the facility section.</li>
	<li>Maintain tools and machinery to prevent loss, damage, and misuse.</li>
	<li>Perform minor maintenance tasks, including&nbsp;but not be limited to the replacement or repair of fixtures using appropriate hand, power, and specialty tools.</li>
	<li>Reconfigure, install, position, and remount modular offices and space (e.g., furniture, wall panels, work surfaces, storage bins, lighting, file cabinets, etc.) to accommodate user needs and maximize office space.</li>
	<li>Complete required checklist, sign required serviceable tags, and ensure all equipment have serviceable tags.</li>
	<li>Obtain the necessary licenses to operate company equipment&nbsp;and vehicles.</li>
	<li>Maintain cleanliness during maintenance activities and ensure the working area is cleaned after maintenance.</li>
	<li>Adhere to company and department-approved systems, policies, and procedures while performing his/her duties.</li>
	<li>Perform any other roles and responsibilities within the scope of his/her specialization as assigned by the direct supervisor</li>
	<li>Participate effectively in environmental protection programs (energy and water saving, waste segregation,) and notify for any environmental related nonconformities.</li>
</ul>

Requirements:

<ul>
	<li>Lower intermediate English languages skills (Knowledge of the structure and content of the English language, including the meanings, spelling of words, rules of composition, and grammar).</li>
	<li>Vocational training as per job requirements.</li>
	<li>Basic understanding of electrical, plumbing, and carpentry is a plus.&nbsp;</li>
	<li>Knowledge of electronic diagnostics and troubleshooting is a plus.</li>
	<li>Diploma degree holders for entry level positions or&nbsp;3 to 11+ years of experience in a related field or industry.</li>
	<li>Valid Jordanian driving license.</li>
	<li>Detail-oriented, thorough, and well organized.</li>
	<li>Physically fit&nbsp;for lifting heavy equipment, flexible&nbsp;to work&nbsp;various shifts, and able&nbsp;to work in confined spaces</li>
</ul>

Facilities Technician

Responsibilities:

<ul>
	<li>Review operation requests in detail by investigating the availability of requested materials or raw materials, interchangeable items, alternative procedures, and locally fabricated items.</li>
	<li>Coordinate with RJ-Reps for any items requested to serve the RJ fleet and classified as RJ-responsibility items.</li>
	<li>Notify Material Planning/Inventory for any items where the quantity is below the re-order level.</li>
	<li>Review and coordinate with Material Planning for NIL (Not in Stock) and NOT (Not On Time) stock items created by operations to serve Routine, SB (Service Bulletins), and AD (Airworthiness Directives).</li>
	<li>Coordinate with Material Planning for all expendable and consumable items requested for non-routine tasks or additional work requests from customers.</li>
	<li>Maintain part definitions.</li>
	<li>Maintain documents, records, files, and reports related to the job.</li>
	<li>In advanced stages, the Material Controller Engineer shall be able to detect any incorrect actions or requests by operations and notify the requester to correct the situation.</li>
	<li>Perform any other roles and responsibilities within the scope of specialization as assigned by the direct supervisor.</li>
</ul>

Requirements:

<ul>
	<li>Bachelor's degree in engineering.</li>
	<li>Lower Intermediate English Language&nbsp;proficiency.</li>
	<li>Professional&nbsp;in Microsoft Office applications.&nbsp;</li>
	<li>Technical Writing</li>
	<li>Highly motivated, self-starter.</li>
	<li>Strong critical thinking abilities.</li>
	<li>Active listening skills.</li>
	<li>Active learning skills.</li>
	<li>Excellent time management skills.</li>
</ul>

Material Support Engineer

Responsibilities:

<ul>
	<li>Ability to meet deadlines and performance targets.</li>
	<li>Ability to handle multiple tasks under various systems and standards functionalities.</li>
	<li>Ability to analyze, interpret, and present safety and quality data.</li>
	<li>Ability to write concise and precise technical reports.</li>
	<li>Collect all relevant information related to the assigned reported occurrence.</li>
	<li>Conduct interviews and record involved staff interviews.</li>
	<li>Analyze company procedures and maintenance data (if applicable) related to the occurrence.</li>
	<li>Perform and participate in Root Cause Analysis (RCA).</li>
	<li>Communicate and update customers.</li>
	<li>Inform relevant authorities of any mandatory occurrence reports within the required timeframe.</li>
	<li>Propose corrective and preventive actions.</li>
	<li>Present the investigation findings and conclusion in the technical occurrence report in a clear and concise manner.</li>
	<li>Process the assigned TOR (Technical Occurrence Report) and MOR (Mandatory Occurrence Report) within defined timeframes.</li>
	<li>Conduct hazard identification and risk assessments.</li>
	<li>Verify that mitigation actions are implemented and effective.</li>
	<li>Promote safety culture.</li>
	<li>Encourage the use of voluntary reporting.</li>
	<li>Carry out safety audits as required.</li>
	<li>Perform any other roles and responsibilities within the scope of specialization as assigned by the direct manager.</li>
	<li>Adhere to company and department-approved systems, policies, and procedures in the performance of duties.</li>
	<li>Participate effectively in environmental protection programs (energy and water saving, waste segregation) and report any environmental-related nonconformities.</li>
	<li>Collect, analyze, and summarize safety-related information and trends to prepare reports and update Q-pulse.</li>
	<li>Participate in safety performance measurement and produce process measurements and statistical analysis.</li>
	<li>Review and recommend improvements in work procedures and safety and quality manuals, and coordinate with other related sections for any revisions and updates.</li>
</ul>

Requirements:

<ul>
	<li>Tertiary qualification or equivalent in an aviation-related field (e.g., Bachelor’s degree in Engineering, B1/B2 License, etc.).</li>
	<li>Knowledge and understanding of Part-145 (EASA/FAA/CARC/GCAA/GACA, etc.).</li>
	<li>Knowledge and understanding of auditing and surveillance procedures and techniques.</li>
	<li>Knowledge and understanding of Safety Risk Management (desired but not essential).</li>
	<li>Knowledge and understanding of safety and quality policies.</li>
	<li>Knowledge and competence in referencing Aircraft Maintenance Manuals (desired but not essential).</li>
	<li>Knowledge and competence using MS Office Suite.</li>
	<li>Knowledge and competence using QPulse (desired but not essential).</li>
	<li>Knowledge and competence using EmpowerMX ERP, AirVault, AirNavX, MyBoeingFleet systems.</li>
	<li>Excellent written and verbal communication skills in English.</li>
	<li>Excellent written and verbal communication skills in Arabic.</li>
	<li>Strong analytical and problem-solving skills.</li>
	<li>Excellent communication and interpersonal skills.</li>
	<li>Excellent organizational and time management skills.</li>
</ul>

Technical Safety Engineer

Responsibilities:

<ul>
	<li>Perform and schedule preventive maintenance, services, troubleshoots, repairs, inspect, test, operate,&nbsp;and maintain&nbsp;serviceability.</li>
	<li>Design advanced propulsion test stands, including 3D modeling, fluids and structural analysis, fabrication drawings, fluids P&amp;IDs, and instrumentation lists.</li>
	<li>Supervise the commissioning and&nbsp;initial operations of GSE and&nbsp;solve a wide range of technical challenges with both short and long-term impacts.&nbsp;</li>
	<li>Enhance safety measures within&nbsp;the facility section and&nbsp;ensure compliance with appropriate fuel standards.</li>
	<li>Support operations&nbsp;and implement related improvements&nbsp;to existing test stands.</li>
	<li>Adhere to company and department-approved systems, policies and procedures while performing his/her duties.</li>
	<li>perform any other roles and responsibilities within the scope of his /her specialization as assigned by the direct supervisor</li>
	<li>Participate effectively in environmental protection programs (energy and water saving, waste segregation,) and notify for any environmental related nonconformities</li>
</ul>

Requirements:

<ul>
	<li>Bachelor's degree in mechanical engineering, Aeronautical&nbsp;Engineering, or a related field.</li>
	<li>M.S. degree&nbsp;is preferred.</li>
	<li>Experience in supervising the maintenance of Ground Support Equipment or industrial equipment in the aerospace, aviation,&nbsp;or similar industrial fields</li>
	<li>Technical expertise in maintenance program design, and risk assessment of maintenance procedures.</li>
	<li>Experience in defining maintenance requirements, implementing, activating, and maintaining GSE.</li>
	<li>Experience in maintaining structural/mechanical equipment, electrical control systems, audio/video equipment, and ground communication systems as required by the position.&nbsp;</li>
	<li>Knowledge of analyzing&nbsp;maintenance programs and providing statistical reports on component failures for repair&nbsp;and preventive maintenance.</li>
	<li>Intermediate knowledge in Windows Operating Systems &amp; Microsoft Office.</li>
	<li>Attention to detail and the ability to identify interactions with other systems to avoid issues.</li>
	<li>Intuitive with strong and fast problem-solving skills.</li>
	<li>Intermediate skill level in CAD is a plus.</li>
	<li>Demonstrating effectiveness and efficiency in performing tasks with minimal supervision.</li>
</ul>

GSE Engineer

Responsibilities:

<ul>
	<li>Ensure tooling and equipment inventory is 100% accurate at all times and entered into the ERP system.</li>
	<li>Maintain check-out/in of all tooling and equipment.</li>
	<li>Ensure tooling and equipment accountability prior to aircraft departures.</li>
	<li>Operate various stores support equipment to move tools as required to other locations.</li>
	<li>Create repair orders for tools and equipment that need to be calibrated or repaired.</li>
	<li>Receive and inspect tooling repair orders (depending on authorization).</li>
	<li>Update tooling information and reports in the ERP system.</li>
	<li>Update tooling information and reports in SharePoint.</li>
	<li>Request new or replacement tools as needed.</li>
	<li>Create and maintain tooling kits as required.</li>
	<li>Maintain a defined record-keeping system.</li>
	<li>Provide periodic reports on supply tools, tools in calibration, and their turnaround time.</li>
	<li>Track inventory and provide employees with shop items through the distribution of company tools and supplies.</li>
	<li>Perform any other roles and responsibilities within the scope of specialization as assigned by the direct manager.</li>
	<li>Adhere to company and department-approved systems, policies, and procedures while performing duties.</li>
	<li>Participate effectively in environmental protection programs (energy and water saving, waste segregation, etc.) and report any environmental-related nonconformities.</li>
</ul>

Requirements:

<ul>
	<li>B.Sc. degree or Diploma in Engineering or a related field, with MRO/Aviation work environment experience preferred. High school diploma is acceptable.</li>
	<li>5S, FTS/CCDCL Level 1 training preferred.</li>
	<li>RCA (Root Cause Analysis) knowledge.</li>
	<li>Knowledge of ERP systems.</li>
	<li>Excellent knowledge of tools, their issuance, and repair.</li>
	<li>Working knowledge of aircraft systems, standard operating procedures, and regulations.</li>
	<li>Excellent communication and interpersonal skills.</li>
	<li>Strong analytical and problem-solving skills.</li>
	<li>Very good command of the English language.</li>
	<li>Microsoft Office skills (Excel, Word, Visio, etc.).</li>
</ul>

Tools Specialist

Responsibilities:

<ul>
	<li>Develop and review OHS policy, processes, and procedures to provide recommended changes to Standard Operating Procedures in alignment with regulatory requirements and industry standards.</li>
	<li>&nbsp;Conduct investigations for all OHS- related incidents/reports.</li>
	<li>&nbsp;Create specific training material and deliver training to all Joramco staff.</li>
	<li>Identify OHS-related hazards and conduct risk assessment using appropriate procedures</li>
	<li>Ensure identifying and developing problem-solving methodologies to resolve repetitive &amp; non-repetitive OHS issues and collaborate with departments to achieve the desired results.</li>
	<li>Ensure compliance with all applicable statutory and regulatory requirements related to OHS, and ensure conformance with any adopted standards by &nbsp;Joramco</li>
	<li>Prepare periodic and non-periodic reports as required</li>
	<li>Adhere to the safety reporting process (identify &amp; report any hazard and injury/accidents)</li>
	<li>Perform any other roles and responsibilities within the scope of his / her specialization as assigned by the direct manager.</li>
	<li>Adhere to company and department approved systems, policies, and procedures while performing duties.</li>
</ul>

Participate effectively in environmental protection programs (energy and water saving, waste segregation,) and notify of any environmental-related nonconformities.

Requirements:&nbsp;

<ul>
	<li>Bachelor’s degree in OHS or any relevant engineering discipline.&nbsp;</li>
	<li>Any accredited/training certificates in OHS.</li>
	<li>Minimum 5 years of experience in OHS, preferably in an aviation work environment.</li>
	<li>Comprehensive knowledge of occupational health and safety regulations and best practices.</li>
	<li>Knowledge of occupational health and safety standards (OSHA, ISO 45001, NEBOSH, etc.)</li>
	<li>Knowledge of Safety Management System</li>
	<li>Good working knowledge of Root Cause Analysis implementation</li>
	<li>Good working knowledge of hazard identification and risk assessment</li>
	<li>Knowledge of ERP system, Ms. Office (Excel, Word, Visio, etc.).</li>
	<li>Ability to handle multi tasks under various systems and standards functionalities</li>
	<li>Ability to analyze, interpret, and present occupational health and safety data.</li>
	<li>Ability to efficiently use Safety tools and software.</li>
	<li>Ability to write concise and precise technical reports</li>
	<li>Accredited training in OHS standards/regulations</li>
</ul>

OHS Engineer

We are a world leading Engine MRO service provider, headquartered in Zurich, Switzerland, with over 90 years of operational experience. Our unwavering dedication to innovation, excellence and environmental responsibility propels us forward on our journey to becoming the leading, most customer-centric, and sustainable Engine focused MRO worldwide.

 
Working with an extensive network of partners and business development offices in Europe, the USA, Asia and the Middle East, we offer comprehensive, fully customized solutions for the Maintenance, Repair and Overhaul of aircraft engines, airframes and components sales business including impeccable technical support to over 500 customers worldwide. Our mission: We safely power your flight.

&nbsp;

As a&nbsp;GTF Engine Technician&nbsp;you will:

<h2>Your tasks</h2>

<ul>
	<li>Assembly and disassembly of aircraft engines and engine modules (PW1100G-JM)</li>
	<li>Technical and administrative completion of all assigned work in accordance with regulations</li>
	<li>Performing assigned work on time and ensuring quality of work</li>
	<li>Application of Lean methodology</li>
	<li>Continuous improvement of the processes to be performed with the aim of improving quality and safety&nbsp;</li>
	<li>Environmentally conscious handling of equipment (resources)</li>
	<li>Independent work, as well as economic way of thinking and acting</li>
</ul>

<h2>Your Profile</h2>

<ul>
	<li>Experience in Engine MRO (in CFM, PW, GE or RR Engines)</li>
	<li>Independent, precise, and responsible working style</li>
	<li>Good team and communication skills</li>
	<li>Good health condition, resilient, flexible</li>
	<li>Personal responsibility and self-motivation are a matter of course</li>
	<li>Good knowledge English, written and spoken, knowledge of German is an advantage</li>
	<li>Willingness to work in 2 shifts</li>
</ul>

<h2>We offer</h2>

We offer an attractive position in a global and dynamic company. Through competitive employment conditions, you will have the opportunity to develop both professionally and personally.

GTF Engine Technician

When a damaged aircraft engine arrives at the Engine Shop, you assess its condition. You disassemble the engine and inspect all individual components. What needs to be replaced, and what materials are required? If necessary, you consult with a specialist. After the repair, you check whether everything has been delivered according to module and prepare the repaired engine for shipment. Additionally, you will supervise new colleagues: teaching them and ensuring they can work independently as quickly as possible.

In addition:

<ul>
	<li>You test the engine for internal damage and detect any anomalies;</li>
	<li>You work with various engine types;</li>
	<li>You always keep the customer’s requirements in mind;</li>
	<li>You report daily to the team lead and the lead mechanic of the Engine Shop;</li>
	<li>You perform administrative tasks;</li>
	<li>You adhere to safety regulations.</li>
</ul>
Spending the entire day working on large and small parts? That’s right up your alley. In fact, you enjoy it: you’re a real techie and love working with your hands. You work quickly but precisely, always spotting potential errors immediately. You also have a strong sense of responsibility and find it important that you and your team can work safely. You don’t hesitate to address colleagues if they don’t follow the regulations. Additionally, you enjoy sharing your experience with junior engine mechanics and helping them find their way in the department.

Furthermore:

<ul>
	<li>You are authorized to perform maintenance on aircraft engines;</li>
	<li>You can work independently and sign off on completed work;</li>
	<li>You speak and understand (technical) English well;</li>
	<li>You have at least three years of experience as an engine mechanic;</li>
	<li>You are familiar with engine types CFM56-7B, CF6, GEnx, and LEAP.</li>
</ul>

33 Unlicensed mechanic / Technician Not specified Jobs