field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

ABOUT COMPANY:FL Technics is a provider of tailor-made services for aircraft maintenance, repair, and overhaul (MRO), delivering solutions to commercial aviation customers worldwide. FL Technics Wheels &amp; Brakes is specialized in the maintenance and repair of aircraft wheels and brakes and its components.&nbsp; &nbsp;To expand our team in Bergamo, we are looking for:&nbsp;NDT INSPECTORYOUR TASKS:<ul><li>Perform testing&nbsp;inspections on components and materials according to approved procedures on the following methods:</li></ul>- Ultrasonic- Eddy Current- Magnetic Particle Inspection- Penetrant Inspection<ul><li>Identification and initiation of additional examinations</li><li>Determination and initiation of necessary repairs on components</li><li>Evaluation and documentation of test results under consideration of valid instructions, guidelines, regulations</li><li>Reading and implementing the manufacturer and customer documentation</li><li>Carrying out the final inspection</li><li>General workshop work</li></ul>&nbsp;WHAT YOU SHOULD BRING:<ul><li>Proven experience of recent practice of all authorized NDT methods (logbooks)</li><li>Training certificates (initial and refresher) under NAS410 and EN4179 requirements</li><li>Ability to provide any other required certificates for aviation regulation compliance</li><li>Eligibility to live and work in EU</li><li>Responsible approach to work</li></ul>WORKING AT FL TECHNICS:<ul><li>Exclusive experience to the aviation business industry</li><li>Access to internal training and courses</li><li>Supporting and cheering for your success team</li><li>Competitive salary range, final offer will be proposed based on your experience and competencies</li></ul>Seize this opportunity to soar to new heights with FL Technics! Apply now and be part of a globally acclaimed team shaping the future of aviation.

NDT inspector 

ABOUT THE COMPANY:FL Technics is a provider of tailor-made services for aircraft maintenance, repair, and overhaul (MRO), delivering solutions to commercial aviation customers worldwide.FL Technics Wheels &amp; Brakes is specialized in the maintenance and repair of aircraft wheels and brakes and its components.&nbsp; &nbsp;To expand our team in Bergamo, we are looking for:&nbsp;AVIATION COMPONENT PAINTER.YOUR TASKS:<ul><li>Perform high-quality surface preparation, priming, and painting of aircraft components—including wheels, hubs, and rims—using approved materials, methods, and aviation maintenance data.</li><li>Ensure all painting activities meet EASA/FAA regulatory requirements and company quality standards, completing inspection sign-offs and job cards within authorized scope.</li><li>Adhere strictly to maintenance documentation, safety procedures, PPE usage, and environmental controls throughout every stage of the painting process.</li><li>Maintain accurate and timely technical documentation and recordkeeping in AMOS, ensuring full traceability and compliance for all completed tasks.</li><li>Collaborate effectively with the painting and wider production teams, participating in daily briefings, assisting colleagues as needed, and contributing to continuous improvement and root cause analysis activities.</li></ul>WHAT YOU SHOULD BRING:Education:&nbsp;<ul><li>Mandatory: Apprenticeship certificate (civil or military), skilled worker/journeyman's certificate for surface finish application – Component painting, Motor vehicle/aircraft painting etc.&nbsp;&nbsp;</li><li>Additional and/or bonus: Aircraft Maintenance License (AML) appropriate to the scope of release activity for surface finish application.&nbsp;</li></ul>&nbsp;Experience:&nbsp;<ul><li>Minimum of 6 - 12 months of practical experience within the trade (surface finish application).&nbsp;</li></ul>&nbsp;Language Proficiency:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; English proficiency in both conversation and reading/writing.&nbsp;WORKING AT FL TECHNICS:<ul><li>Exclusive experience to the aviation business industry;</li><li>Access to internal training and courses;</li><li>Supporting and cheering for your success team;</li><li>Competitive salary range, final offer will be proposed based on your experience and competencies.</li></ul>Seize this opportunity to soar to new heights with FL Technics! Apply now and be part of a globally acclaimed team shaping the future of aviation.

AVIATION COMPONENT PAINTER 

ABOUT THE COMPANY:FL Technics Wheels &amp; Brakes &nbsp;is a subsidiary of FL Technics UAB, a provider of tailor-made services for aircraft maintenance, repair, and overhaul (MRO), delivering solutions to commercial aviation customers worldwide. FL Technics Wheels &amp; Brakes &nbsp;specializes in the maintenance and repair of aircraft wheels and brakes.&nbsp;&nbsp;&nbsp;To expand our team, we are looking for: COMPONENT CERTIFYING STAFFYOUR TASKS:<ul><li>Carry out disassembling, cleaning, blasting, inspection/ testing and assembly of wheels and brakes as well as their substructure components within scope of authorizations</li><li>Rectification all defects founded on component during inspection within scope of authorizations</li><li>Certify work performed by others within scope of authorizations</li><li>Provide training to new staff and trainees as and when required</li><li>Use of maintenance data, carry out and sign-off job cards within scope of authorizations</li><li>Work/ task distribution to other in according to the qualification and experience, workload, work priorities</li><li>Issue Project Release to service and EASA FORM1 for components within scope of authorizations</li><li>Proper usage and storage of tools and equipment and ensuring all special equipment to be used according to approved manuals and having sufficient qualification, knowledge, experience</li></ul>WHAT YOU SHOULD BRING:<ul><li>Education: Proven completed vocational training/apprenticeship certificate in a field conducive to release activity of the aircraft wheels and brakes</li></ul>&nbsp;or<ul><li>An Aircraft Maintenance License (AML) related to the type and scope of the release activity</li></ul>or<ul><li>An aeronautical diploma or certificate from the relevant field, which is conducive to the release activity</li></ul>or<ul><li>Technical school diploma/certificate</li></ul>or<ul><li>Military diploma or certificate related to the release activity, aeronautical diploma or certificate</li><li>Experience qualification acquired within last 12 months of practical maintenance experience or equivalent experience at another approved aircraft or components maintenance organization - logbooks and/or company authorization certificates</li><li>English language - sufficient, reading &amp; written, a working knowledge of the language in which the maintenance data is published (mainly in English)</li><li>Using and knowledge of the ERP system – AMOS (advantage)</li><li>Must have EU passport/residence permit</li></ul>WORKING AT FL TECHNICS:<ul><li>Exclusive experience to the aviation business industry;</li><li>Access to internal training and courses;</li><li>Supporting and cheering for your success team;</li><li>Competitive salary range, final offer will be proposed based on your experience and competencies.</li></ul>Seize this opportunity to soar to new heights with FL Technics! Apply now and be part of a globally acclaimed team shaping the future of aviation.

AVIATION COMPONENT CERTIFYING STAFF (WHEELS AND BRAKES)

ABOUT THE COMPANY:FL Technics Wheels &amp; Brakes is a subsidiary of FL Technics UAB, a provider of tailor-made services for aircraft maintenance, repair, and overhaul (MRO), delivering solutions to commercial aviation customers worldwide. FL Technics Wheels &amp; Brakes &nbsp;is specialized in the maintenance and repair of aircraft wheels and brakes.&nbsp;&nbsp;&nbsp;To expand our team, we are looking for:AVIATION COMPONENT MECHANIC (WHEELS AND BRAKES)YOUR TASKS:<ul><li>Carry out Aircraft wheel and brake disassembling, cleaning, blasting, inspection and assembling as well as their substructure components within scope of authorizations;</li><li>Declare and rectification all defects founded on component during disassembling, cleaning, inspection and assembling within scope of authorizations;</li><li>Complete the signing of technical documents, and the signing of the required inspection items of the corresponding work sheet, job card or similar within scope of authorizations;</li><li>Use and strict following of maintenance data, carry out and sign-off job cards within scope of authorizations;</li><li>Receive and prioritize work orders, work sheets etc.;</li><li>Performing administration related tasks, like data entry into ERP systems (AMOS) etc. within scope of authorizations;</li><li>Work/ task distribution to other in according to the qualification and experience, workload, work priorities;</li><li>Determination and initiation of necessary repairs on components;</li><li>Proper usage and storage of tools and equipment and ensuring all special equipment to be used according to approved manuals and having sufficient qualification, knowledge, experience;</li><li>Assist other production staff as needed;</li><li>Support for other departments and managers;</li><li>Compliance with occupational safety and health, environmental protection, civil protection, fire safety requirements, and internal rules.</li></ul>WHAT YOU SHOULD BRING:<ul><li>Experience qualification acquired within last 6 -12 months of practical aviation maintenance experience or equivalent experience at another approved aircraft or components maintenance organization;</li><li>Education: High School Diploma or equivalent foreign country level;</li><li>English language - sufficient, reading &amp; written, a working knowledge of the language in which the maintenance data is published (mainly in English);</li><li>Must hold EU passport.</li></ul>WORKING AT FL TECHNICS:<ul><li>Exclusive experience to the aviation business industry;</li><li>Access to internal training and courses;</li><li>Supporting and cheering for your success team;</li><li>Competitive salary range, final offer will be proposed based on your experience and competencies.</li></ul>Seize this opportunity to soar to new heights with FL Technics! Apply now and be part of a globally acclaimed team shaping the future of aviation.

AVIATION COMPONENT MECHANIC (WHEELS AND BRAKES)

Key Aspects of the Activity<ul><li>Acting as certifying staff in AMAC 145 maintenance organization</li><li>Performance of routine and non-routine task cards</li><li>Performance of related operational tasks</li><li>Troubleshoot, repair, inspect and rectify flight problems</li><li>Perform and record all work performed in accordance appropriate manuals and regulations</li><li>Liaising with respective internal 145 MRO and PO part 21 shops for all maintenance issue</li><li>Work away from home base to support customers during AOG</li></ul> Required Skills and Qualifications<ul><li>5&nbsp;years practical experience of base maintenance</li><li>Holder of European EASA Part-66 Cat B2 with 2-3 years’ experience as Certifying Staff of the following aircraft types; B737, B747, B757, B767, B777, B787 rating with minimum 3 years’ experience as Certifying Staff on aircraft type</li><li>Fluent in English</li><li>Ability / flexibility to work and to adapt in different environments</li><li>Advanced trouble shooting experience</li><li>Awareness of highest standard in terms of quality, reliability and safety</li></ul> What we offer you (among other things)<ul><li>Working in an owner-managed, young and dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidized meals in our canteen, as well as parking spaces (or free shuttle bus transports) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ</li></ul>

AMAC Aerospace Switzerland AG

AMAC Aerospace

B2 EASA Licensed Avionics Technician Boeing

Your tasks &amp; responsibilities<ul><li>Conduct annual Training Needs Assessments</li><li>Develop, update, and maintain Training Syllabus and Materials for a wide range of regulatory and technical trainings, including:<ul><li>EASA Part 145 Continuation Training</li><li>EWIS, FTS, and SMS Training</li><li>EASA Part CAMO Continuation Training</li><li>EASA Part 21G / 21J Continuation Training</li></ul></li><li>Deliver internal training programs (theoretical, technical, or practical), except those requiring EASA Part 147 approval</li><li>Coordinate with the Quality Assurance Administrative Staff to manage the implementation and follow-up of all AMAC internal training activities</li><li>Prepare and organise training sessions based on departmental or regulatory needs</li><li>Manage and maintain the internal training certificates</li></ul>The expertise you have &amp; skills you bring Qualification:<ul><li>Instructor in an EASA Part 147 environment</li><li>Qualified Instructor in Safety Management Systems (SMS) and Human Factors</li><li>Good knowledge of EASA Initial &amp; Continuing Airworthiness environments</li><li>Holder of a Train the Trainer Certificate</li><li>Holder of B1/B2 EASA License</li></ul>Professional Background:<ul><li>Strong experience in EASA Initial &amp; Continuing Airworthiness environments</li><li>Good knowledge of EN 9100/9110 requirements</li><li>Experience as a Quality Inspector, Maintenance Certifying Staff, and Training Organisation</li><li>Fluent in French and English (both written and spoken)</li><li>Good knowledge of Microsoft Office Software (PowerPoint, Word, Excel, etc.)</li><li>Ability to work within a team</li><li>Strong presentation and training delivery skills</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young and dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like at least 5 weeks of holidays</li><li>A workplace in the middle of the city of Basel and various employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>Corporate events like our summer BBQ and the famous annual Christmas Party</li></ul> Additional information<ul><li>General working place: Hangar Facilities at EuroAirport Basel-Mulhouse-Freiburg</li></ul>

Instructor

Position and Responsibility<ul><li>Act as Electrical/Avionic Design Engineer – designing cabin related and avionics systems.</li><li>Support her/his superiors in developing below listed systems` design:</li><li>Environmental control (air-conditioning, heating, humidification)</li><li>In-flight entertainment, cabin management</li><li>Communication and computer networks (Telephony, GSM, LAN/WLAN)</li><li>Satellite communication, High-speed Data, Satellite TV</li><li>Power generation, supply and distribution</li><li>Galleys, seats, interior doors, window shades</li><li>Smoke detection and passenger oxygen</li><li>Water System</li><li>Cabin Basic Lighting System</li><li>Emergency Lighting System</li><li>Work independently on system designs</li><li>Modify &amp; Commission and test of electrical/avionic systems on Transport Category Aircraft for cabin completion and modification projects</li></ul>&nbsp; Key Aspects of the Activity<ul><li>Preparation of System-Specification and Service-Definitions</li><li>Support to project preparation (i.e. Request for Quotation, Order Description, Material Orders)</li><li>Preparation of Layout Drawings, Block Diagrams, Wiring Diagrams, Item Lists,&nbsp;Wire Lists, Drawings Lists and handling of related ECO and PCR</li><li>Preparation of Installation Instruction and Documentation (i.e. EO, SB)</li><li>Preparation of Ground- , Flight Checks and Test Procedures</li><li>Preparation of Compliance Documentation, Reports &amp; Analysis regarding</li><li>Equipment Qualification, Wire-Routing and Installation, Safety and Hazard&nbsp;Assessments</li><li>Administration of Vendor Information and Manuals</li><li>Liaison and cooperation with Avionic &amp; Electrical Services Department</li><li>Liaison and cooperation with Office of Airworthiness, Mechanical Production</li><li>Engineering and Mechanical Design Engineering</li><li>Liaison and cooperation with Vendors and Supplier of parts, components and&nbsp;avionic/electrical systems and Test-Facilities</li><li>Selection of equipment, components, materials</li><li>Development of electrical wiring diagrams (Visio)</li><li>Preparation of ground-and flight-test procedures</li><li>Develop technical and safety and certification documentation (reports, analysis, assessments)</li><li>Develop engineering standards</li></ul>Required Skills and Qualifications<ul><li>Applicable Electronic/Electrical Engineering degree or similar qualification required</li><li>Aviation Experience &amp; Design Engineering experience would be advantageous</li><li>Minimum 3 years’ experience</li><li>MS Office (Visio, Word, Excel, Power Point) and CAD literacy</li><li>Good communication skills in English, German and/or French advantageous</li><li>Good at time management</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

Avionics & Electrical Engineer

Position Title:Aviation Safety Staff Engineer (Design, Certification, MMEL, and Operations) City: Tysons (McLean) State: VA Country:US Type: 4 (Exempt, Bargaining Unit 1 (EB) # of Openings: 1 Category:Engineering &amp; Air Safety - Staff Engineer Company Name: Air Line Pilots Association, Int'l., Tysons (McLean), Virginia, United States Description:Aviation Safety Staff Engineer (Design, Certification, MMEL and Operations)The Air Line Pilots Association, International (ALPA), the largest airline pilot union in the world and the largest non-governmental aviation safety organization in the world (representing over 80,000 pilots at 42 U.S. and Canadian airlines) seeks an experienced Staff Engineer for our Tysons (McLean), Virginia office. The Staff Engineer provides staff coordination and liaison with government, industry, and professional stakeholders on behalf of the Air Safety Organization and other Association committees, MECs, and National Officers, as assigned by the department Director or Manager. Their specific focus is in the policy areas of Part 25 aircraft design/certification, as well as Part 121 continuing airworthiness, operations specifications, and aircraft maintenance, including master minimum equipment list (MMEL) policies and procedures. They provide coordination and technical support to the Air Safety Organization, accident and incident investigations, Federal Aviation Administration (FAA) and Transport Canada (TC) pilot certificate enforcement action cases, and other safety investigations in the areas of aircraft design, manufacturing, and continuing airworthiness/maintenance. The Staff Engineer effectively represents the Association and the department, interacting with government and industry safety officials on a routine basis, advocating on behalf of the Association’s priorities from a policy perspective. They are also routinely tasked to use their engineering training and experience to analyze Airworthiness Directives, Petitions for Exemption, and Special Conditions to develop recommended action by the association. In coordination with relevant committees and staff members, they develop and coordinate written communications to membership, government, and industry groups outlining ALPA positions on a wide variety of operational safety issues. While this position requires engineering expertise, it is a policy position. The staff engineer will be routinely asked to translate engineering information into summaries for department management and leadership.Local, national, and international travel: up to 25%.ALPA is an equal opportunity employer that is committed to diversity and inclusion in a safe workplace. We prohibit discrimination, harassment and harmful behavior of any kind based on race, color, sex, religion, sexual orientation, national origin, gender identity, caste, disability, genetic information, pregnancy, or other protected characteristics as outlined in federal or provincial laws. We highly value everyone and all are encouraged to apply, including minorities, veterans, and people with disabilities.This position is covered by a collective bargaining agreement.ALPA is a member-driven, staff supported, union with two internal professional unions. Minimum Requirements:<ul><li>Bachelor's degree in relevant area, e.g., Aerospace or Aeronautical Engineering or other related engineering discipline, from an accredited college or university required.</li><li>Three (3) years of related experience in the civilian aviation industry, five (5) or more strongly preferred.</li><li>Experience in U.S. and/or Canadian Aviation Regulations (FARs and CARs), national and international aviation standards, and aircraft design standards required.</li><li>Familiarization with and participation in policy activities that include the Aviation Rulemaking Advisory Committee (ARAC), the Canadian Aviation Regulation Advisory Council (CARAC), and Aviation Rulemaking Committee (ARC) processes is strongly preferred.</li><li>A pilot’s license with an instrument rating and/or special knowledge or applicable expertise in the aviation industry preferred. Other aviation industry experience may be substituted for the pilot’s license.</li><li>Experience in Part 25 airplane design/certification and/or Part 121 operations and continuing airworthiness, as well as airplane maintenance, is required.</li><li>FAA Airframe and Powerplant certification (A&amp;P license) and/or equivalent experience with maintenance and/or large aircraft manufacturing preferred.</li><li>Experience with NTSB and/or TSB accident investigation processes preferred.</li><li>Strong technical writing skills are required, and public speaking skills beneficial.</li><li>Excellent interpersonal and communication skills, oral and written, for effective interaction with all levels of contacts, internal and external.</li><li>Ability to collaboratively work in multi-disciplined team</li><li>Must be a self-starter with professional maturity and sound judgment, capable of independent decision-making and to be proactive in identifying and responding to issues and problems.</li><li>Must possess exceptional time management skills; be able to work in a fast-paced, multi-tasking environment; and transition easily between projects.</li><li>Software: Microsoft Word, Outlook, Excel, and PowerPoint.</li></ul>Physical Demands:Note: The physical demands described herein are characteristic of those that must be met to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals to perform the essential physical activities of this position described below.Constantly operates a computer/smartphone/tablet. Regularly required to maintain a stationary position, move about the office and the local metropolitan area, determine what others have said or written, and converse with others and exchange accurate information.Regularly required to sit, stand, bend, reach, and move about the office and travel (locally, nationally, and internationally). Also includes occasional bending, stooping, squatting, and/or pushing and pulling or moving, e.g., to pack, unpack, and/or move cases.Occasionally required to move, raise, reach, and/or retrieve binders, books, boxes, and files up to ten (10) pounds (lbs.). While on travel, could be responsible to move luggage weighing as much as 50 lbs. (Assistance may not always be available.)ALPA offers competitive salaries with terrific benefits, including:<ul><li>401k Plan with Non-Elective Employer Contribution of 12% plus 2% into a Market-Based Cash Balance Plan after 180 days of employment. No employee contribution required! The 401k plan includes a Roth option and 4-year vesting schedule.</li><li>Generous health care benefits on day one – PPO, Kaiser (where available), and a High Deductible Health Plan which includes coverage for medical, dental, and vision benefits for employee, spouse, and/or dependent children;</li><li>days paid vacation and holidays per year plus 2 volunteer days per year;</li><li>Generous sick and bereavement leave;</li><li>Competitive parental leave;</li><li>Company-paid premiums for disability and life insurance;</li><li>Flexible Spending and Health Savings accounts;</li><li>Retiree health plan;</li><li>Education Assistance Program; and,</li><li>Optional benefits including pet insurance, excess life insurance, legal plan, and qualified transportation fringe benefits, where available.</li><li>Partial remote work opportunities.</li></ul>PROJECTED ANNUAL SALARY RANGE: $ 96,027.00 – $ 137,179.00Relocation not provided.Sponsorship not available for this position.PM19 PI280568312

Air Line Pilots Association

Aviation Safety Staff Engineer (Design, Certification, MMEL, and Operations)

Helo Recruitment is looking for A220 B1/B2 Engineers on behalf of our client Comlux. &nbsp;Comlux is one of the leaders in business aviation, transaction and completion services. For over 20 years, the company has been engineering luxury for VIP customers seeking personal and professional management of their private aviation needs, including aircraft sales and acquisitions, aircraft operations and charter management, cabin interiors, maintenance and upgrades.Role Requirements:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Valid and current EASA B1 and/or B2 licence •&nbsp;&nbsp;&nbsp;&nbsp;Current A220 type rating •&nbsp;&nbsp;&nbsp;&nbsp;(Additional type ratings such as A320, B767, or Bombardier will be considered an advantage) •&nbsp;&nbsp;&nbsp;&nbsp;Minimum 6 months of recency on A220 •&nbsp;&nbsp;&nbsp;&nbsp;Strong experience in line and base maintenance •&nbsp;&nbsp;&nbsp;&nbsp;Experience with VVIP flight operations is a strong advantage •&nbsp;&nbsp;&nbsp;&nbsp;Good written and verbal English communication skillsBenefits Package:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Competitive monthly fee •&nbsp;&nbsp;&nbsp;&nbsp;Additional payment for each valid type rating •&nbsp;&nbsp;&nbsp;&nbsp;3-year renewable contract •&nbsp;&nbsp;&nbsp;&nbsp;Dubai base •&nbsp;&nbsp;&nbsp;&nbsp;Visa sponsorship provided •&nbsp;&nbsp;&nbsp;&nbsp;Hotel accommodation covered during visa processing •&nbsp;&nbsp;&nbsp;&nbsp;Housing allowance after visa issuance •&nbsp;&nbsp;&nbsp;&nbsp;Premium medical insurance •&nbsp;&nbsp;&nbsp;&nbsp;Travel tickets between home country and operating base •&nbsp;&nbsp;&nbsp;&nbsp;Per diems, accommodation, and transportation provided when operating outside the base •&nbsp;&nbsp;&nbsp;&nbsp;1 return flight ticket to home country per yearApplication Process:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Helo Recruitment screening&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interviewWe welcome all applications, but please note we will only contact candidates shortlisted in the second round.

First 2 Resource

A220 B1/B2 Engineer for Comlux | Relocation to Dubai

First2 Resource partner company CRM is looking A320F B1/B2 Engineers on behalf of our client ETG Maintenance.ETG Maintenance is an EASA Part-145 approved organization based in Republic of Bulgaria. They perform all kinds of base and line maintenance for Airbus A320 CEO, MD 80 and Boeing 737 Classic/NG, including heavy and redelivery checks.Role Requirements:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current B1/ B2 license issued by EASA &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current on A320F •&nbsp;&nbsp;&nbsp;&nbsp;Familiar with AirNav, standard MS Office •&nbsp;&nbsp;&nbsp;&nbsp;Strong aircraft maintenance experience in line-maintenanceBenefits Package:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Competitive monthly fee •&nbsp;&nbsp;&nbsp;&nbsp;Permanent contract •&nbsp;&nbsp;&nbsp;&nbsp;20 days of paid annual leave •&nbsp;&nbsp;&nbsp;&nbsp;Approx. 160 working hours per month (10-hour shifts) •&nbsp;&nbsp;&nbsp;&nbsp;Base maintenance: Varna, Bulgaria •&nbsp;&nbsp;&nbsp;&nbsp;Line maintenance: Across the EU •&nbsp;&nbsp;&nbsp;&nbsp;Meal vouchers provided •&nbsp;&nbsp;&nbsp;&nbsp;Travel expenses covered •&nbsp;&nbsp;&nbsp;&nbsp;Visa support if required •&nbsp;&nbsp;&nbsp;&nbsp;Accommodation and ground transportation provided during assignmentsApplication Process:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;CRM screening&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interview We welcome all applications, but please note we will only contact candidates shortlisted in the second round.

38 Technical and engineering Jobs