field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

field_job_type_rating

field_flight_regions

aviationcv_job_recency

Position and Responsibility<ul><li>Act as Electrical/Avionic Design Engineer – designing cabin related and avionics systems.</li><li>Support her/his superiors in developing below listed systems` design:</li><li>Environmental control (air-conditioning, heating, humidification)</li><li>In-flight entertainment, cabin management</li><li>Communication and computer networks (Telephony, GSM, LAN/WLAN)</li><li>Satellite communication, High-speed Data, Satellite TV</li><li>Power generation, supply and distribution</li><li>Galleys, seats, interior doors, window shades</li><li>Smoke detection and passenger oxygen</li><li>Water System</li><li>Cabin Basic Lighting System</li><li>Emergency Lighting System</li><li>Work independently on system designs</li><li>Modify &amp; Commission and test of electrical/avionic systems on Transport Category Aircraft for cabin completion and modification projects</li></ul>&nbsp; Key Aspects of the Activity<ul><li>Preparation of System-Specification and Service-Definitions</li><li>Support to project preparation (i.e. Request for Quotation, Order Description, Material Orders)</li><li>Preparation of Layout Drawings, Block Diagrams, Wiring Diagrams, Item Lists,&nbsp;Wire Lists, Drawings Lists and handling of related ECO and PCR</li><li>Preparation of Installation Instruction and Documentation (i.e. EO, SB)</li><li>Preparation of Ground- , Flight Checks and Test Procedures</li><li>Preparation of Compliance Documentation, Reports &amp; Analysis regarding</li><li>Equipment Qualification, Wire-Routing and Installation, Safety and Hazard&nbsp;Assessments</li><li>Administration of Vendor Information and Manuals</li><li>Liaison and cooperation with Avionic &amp; Electrical Services Department</li><li>Liaison and cooperation with Office of Airworthiness, Mechanical Production</li><li>Engineering and Mechanical Design Engineering</li><li>Liaison and cooperation with Vendors and Supplier of parts, components and&nbsp;avionic/electrical systems and Test-Facilities</li><li>Selection of equipment, components, materials</li><li>Development of electrical wiring diagrams (Visio)</li><li>Preparation of ground-and flight-test procedures</li><li>Develop technical and safety and certification documentation (reports, analysis, assessments)</li><li>Develop engineering standards</li></ul>Required Skills and Qualifications<ul><li>Applicable Electronic/Electrical Engineering degree or similar qualification required</li><li>Aviation Experience &amp; Design Engineering experience would be advantageous</li><li>Minimum 3 years’ experience</li><li>MS Office (Visio, Word, Excel, Power Point) and CAD literacy</li><li>Good communication skills in English, German and/or French advantageous</li><li>Good at time management</li><li>Pro-active team player with an object oriented functioning</li><li>Dedicated to quality, reliability and safety</li></ul> What we offer (among other things)<ul><li>Working in an owner-managed, young dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like 5 weeks of holidays (6 weeks as of 50 years)</li><li>Free on-site English lessons and individual further training and development opportunities</li><li>Subsidised meals in our canteen, as well as parking spaces (or free shuttle bus transport) and other employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>In case of relocation: support with relocation / work permit&nbsp;</li><li>Corporate events like our famous annual Christmas Party and the summer BBQ&nbsp;</li></ul>

AMAC Aerospace Switzerland AG

AMAC Aerospace

Avionics & Electrical Engineer

Your tasks &amp; responsibilities<ul><li>Conduct annual Training Needs Assessments</li><li>Develop, update, and maintain Training Syllabus and Materials for a wide range of regulatory and technical trainings, including:<ul><li>EASA Part 145 Continuation Training</li><li>EWIS, FTS, and SMS Training</li><li>EASA Part CAMO Continuation Training</li><li>EASA Part 21G / 21J Continuation Training</li></ul></li><li>Deliver internal training programs (theoretical, technical, or practical), except those requiring EASA Part 147 approval</li><li>Coordinate with the Quality Assurance Administrative Staff to manage the implementation and follow-up of all AMAC internal training activities</li><li>Prepare and organise training sessions based on departmental or regulatory needs</li><li>Manage and maintain the internal training certificates</li></ul>The expertise you have &amp; skills you bring Qualification:<ul><li>Instructor in an EASA Part 147 environment</li><li>Qualified Instructor in Safety Management Systems (SMS) and Human Factors</li><li>Good knowledge of EASA Initial &amp; Continuing Airworthiness environments</li><li>Holder of a Train the Trainer Certificate</li><li>Holder of B1/B2 EASA License</li></ul>Professional Background:<ul><li>Strong experience in EASA Initial &amp; Continuing Airworthiness environments</li><li>Good knowledge of EN 9100/9110 requirements</li><li>Experience as a Quality Inspector, Maintenance Certifying Staff, and Training Organisation</li><li>Fluent in French and English (both written and spoken)</li><li>Good knowledge of Microsoft Office Software (PowerPoint, Word, Excel, etc.)</li><li>Ability to work within a team</li><li>Strong presentation and training delivery skills</li></ul>What we offer (among other things)<ul><li>Working in an owner-managed, young and dynamic company with hands-on mentality</li><li>Multifaceted, challenging and responsible position within an exclusive environment</li><li>Attractive employment conditions and social benefits like at least 5 weeks of holidays</li><li>A workplace in the middle of the city of Basel and various employee discounts (Fleets, Bars &amp; Restaurants etc.)</li><li>Corporate events like our summer BBQ and the famous annual Christmas Party</li></ul> Additional information<ul><li>General working place: Hangar Facilities at EuroAirport Basel-Mulhouse-Freiburg</li></ul>

Instructor

First2 Resource is looking for B737 NG &amp; MAX B1/B2 Engineers on behalf of our Germany-based client.Role Requirements:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Being EASA Part-66 Licensed with categories B1, B2 or Cat A (B1+B2 preferable) &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Having B737-800 Type Rating and/or experience (i.e., having 6 months worked on the aircraft in the last 2 years; additional 737MAX type rating and/or experience preferable) •&nbsp;&nbsp;&nbsp;&nbsp;Having a minimum of 5 years’ experience required on related types •&nbsp;&nbsp;&nbsp;&nbsp;Open to work flexibly, in shifts, and once required, with duty layovers at other line stations • &nbsp; &nbsp; &nbsp; Living (or willing to relocate) in Cologne, Nuremberg, Düsseldorf, or Hanover •&nbsp;&nbsp;&nbsp;&nbsp;Right to live and work in the EUMain Responsibilities: •&nbsp;&nbsp;&nbsp;&nbsp;To perform all aircraft line maintenance jobs according to his authorization of PART-66 License •&nbsp;&nbsp;&nbsp;&nbsp;To perform and issue all necessary maintenance records and reports (CRS, Technical Log Book, Technical Delay Reports, Daily Status) •&nbsp;&nbsp;&nbsp;&nbsp;To ensure that aircraft are maintained in accordance with up-to-date aircraft manuals and MOE •&nbsp;&nbsp;&nbsp;&nbsp;To use necessary tools and equipment for aircraft maintenance and ensure that all tools and equipment are serviceable and calibrated •&nbsp;&nbsp;&nbsp;&nbsp;To ensure that all parts are serviceable and effective&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;To order necessary components and consumable parts which are used for repairs, defect rectification, and scheduled maintenance checks •&nbsp;&nbsp;&nbsp;&nbsp;To join flights for troubleshooting and in-flight inspections of aircraft system failures in case of needBenefits Package:&nbsp; • &nbsp;Extendable fixed-term German contract that automatically becomes permanent after 2 years • &nbsp;Travel allowance when working outside Germany (e.g., India, Egypt, etc.) • &nbsp;20 days’ holiday per calendar year • &nbsp;Rotation: 4 days on / 4 days off; 12-hour shifts (including a 2-hour break) • &nbsp;Base: NUE, CGN, HAJ, or DUSApplication Process:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;F2R screening&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interviewWe welcome all applications, but please note we will only contact candidates shortlisted in the second round.

First 2 Resource

B737 NG&MAX B1/B2 Engineer

First2Resource partner company, CRM, is looking for B1 Engineers current on B787, A350, A320NG, A330 CEO/NEO on behalf of our client SO Tech. &nbsp;SO Tech was founded in 2008 and received its EASA Part 145 approval in January 2009. Within 2 months of receiving EASA Part 145 approval their dedicated and skilled team had opened two fully functional line stations in Iceland and Belgium.&nbsp; Since 2008 SO Tech has seen steady and strong growth within the aviation industry as our approvals and capabilities continue to grow.Role Requirements: &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Valid EASA Part 66. B1 •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current on B787, A350, A320NG, A330 CEO/NEO •&nbsp;&nbsp;&nbsp;&nbsp;Deep knowledge of aircraft maintenance and operation&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;High level of integrity and commitment &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Able to manage different levels of workload &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Very good communication skills both oral and written English is essential &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Good knowledge of IT-tools related to Aircraft MaintenanceBenefits Package: &nbsp; &nbsp; &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Competitive fee •&nbsp;&nbsp;&nbsp;&nbsp;1-month contract •&nbsp;&nbsp;&nbsp;&nbsp;Start dates: 1st group — 9 January; 2nd group — 15 March •&nbsp;&nbsp;&nbsp;&nbsp;Location: Dominican Republic •&nbsp;&nbsp;&nbsp;&nbsp;Covered travel expenses •&nbsp;&nbsp;&nbsp;&nbsp;Provided accommodation &amp; transportation &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Application Process: &nbsp; &nbsp;&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;CRM screening &nbsp;&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening &nbsp;&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interview &nbsp; &nbsp;We welcome all applications, but please note we will only contact candidates shortlisted in the second round.

B787, A350, A320NG, A330 CEO/NEO B1 Engineer for SO Tech I Short-term contract

First2Resource partner company, CRM, is looking for A320, B737, A330, B787 B1/B2 Engineers on behalf of our client Challenge Technic. &nbsp;Originally founded as JETMX in 2018, Challenge Technic today employs highly skilled technical staff in 5 state-of-the-art line stations, whose core focus is absolute airworthiness. 24/7 maintenance operations and a close-knit MRO network ensure that airline customers are never parted from their assets for longer than necessary.Role Requirements:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current B1/ B2 license issued by EASA &nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current on A320, B737, A330, B787 (GEnx AND RR Trent 1000) •&nbsp;&nbsp;&nbsp;&nbsp;Comfortable using aircraft maintenance documentation, computer-based reporting and recording systems •&nbsp;&nbsp;&nbsp;&nbsp;Strong aircraft maintenance experience in line-maintenance •&nbsp;&nbsp;&nbsp;&nbsp;Right to live and work in the EUBenefits Package:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Competitive fee • &nbsp; &nbsp;Additional payment for each type rating •&nbsp;&nbsp;&nbsp;&nbsp;Indefinite contract •&nbsp;&nbsp;&nbsp;&nbsp;Base: SID (Cape Verde) •&nbsp;&nbsp;&nbsp;&nbsp;Travel tickets between home and operating bases provided •&nbsp;&nbsp;&nbsp;&nbsp;Accommodation and transportation provided when outside of the home baseApplication Process:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;CRM screening&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interviewWe welcome all applications, but please note we will only contact candidates shortlisted in the second round.

A320, B737, A330, B787 B1/B2 Engineer for Challenge Technic (SID)  

First2 Resource partner company, Airborne Personnel, is looking for B1 and/or B2 engineers type-rated on B747 (GE CF6-80 or PW4000) and/or B777-200/300 (GE or RR) for an ongoing contract in Hangzhou, Hong Kong, and Budapest on behalf of our client, Air Atlanta Icelandic.Air Atlanta Icelandic is a charter and ACMI airline based in Kópavogur, Iceland. It specializes in leasing aircraft on an ACMI (Aircraft, Crews, Maintenance, Insurance) and wet lease basis to airlines worldwide needing extra passenger and cargo capacity.Role Requirements: •&nbsp;&nbsp;&nbsp;&nbsp;Certified and current B1 and/or B2 license issued by EASA •&nbsp;&nbsp;&nbsp;&nbsp;Type-rated and experienced on B747 (GE CF6-80 or PW4000) and/or B777-200/300 (GE or RR) •&nbsp;&nbsp;&nbsp;&nbsp;Comfortable using aircraft maintenance documentation, computer-based reporting, and recording systems •&nbsp;&nbsp;&nbsp;&nbsp;Strong aircraft maintenance experience in line-maintenance •&nbsp;&nbsp;&nbsp;&nbsp;Working knowledge of health and safety legislation •&nbsp;&nbsp;&nbsp;&nbsp;Renewed Medical certificateBenefits Package: •&nbsp;&nbsp;&nbsp;&nbsp;Competitive fee and bonuses •&nbsp;&nbsp;&nbsp;&nbsp;1-year renewable contract •&nbsp;&nbsp;&nbsp;&nbsp;Flexible and negotiable shift pattern •&nbsp;&nbsp;&nbsp;&nbsp;Bases: Hong Kong, Hangzhou, Budapest •&nbsp;&nbsp;&nbsp;&nbsp;Travel tickets between home and operating bases provided •&nbsp;&nbsp;&nbsp;&nbsp;Accommodation and transportation provided when outside of the home baseApplication Process:&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Airborne Personnel screening&nbsp;&nbsp;&nbsp;&nbsp; •&nbsp;&nbsp;&nbsp;&nbsp;Client screening •&nbsp;&nbsp;&nbsp;&nbsp;Face-to-face interviewWe welcome all applications, but please note we will only contact candidates shortlisted in the second round.

B747/B777 B1/B2 Engineers for Air Atlanta Icelandic (HKG) (HGH) (BUD)

Job Title: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; CNC MillerSalary:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Negotiable&nbsp;Location: &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; BristolAn opportunity is now available to join a private, family- owned UK aerospace manufacturing group. Our client is looking to hire a CNC Miller to be based at their site in Bristol. This is a permanent position working 37 hours per week with an early finish on Fridays.Established more than 80 years ago they have since merged with a second company to create a leading supplier of complex, machined components and assemblies for the aerospace industry. They have specialist capabilities including thread rolling, heat treatment and NDT with customers in civil, defence, production and aftermarket sectors.As a CNC Miller your role involves the setup, operation, and maintenance of CNC machines. Your expertise in machine setup and precision machining will ensure the production of high-quality parts that meet strict industry standards and specifications. You will work closely with engineers, and other manufacturing personnel to achieve efficient and accurate machining operations.Hours of work are Monday- Thursday: 7.30am- 4pm and Fridays: 7.30am- 12.30pm.There is also the opportunity to work a double day shift should you wish to but this is not mandatory.Main Responsibilities:&nbsp;<ul><li>Setting and operating 3/4/5 axis CNC milling machines using Heidenhain controls</li><li>Producing high complexity components from a range of materials</li><li>Adhering to quality standards</li><li>Involvement and attendance at SQDCP meetings in assigned area/s</li><li>Ensuring performance of part production to planned set and run times and Quality requirements</li><li>Communicating Not Right first time (NRFT) within assigned areas</li><li>Recording and assisting the Manufacturing Group Leader in improving the 5S organisation of the assigned Team areas and personal responsibility of machines being operated</li><li>Responsible for attending and participating in progress meetings as required</li><li>Responsible for ensuring correct materials, Route Cards, drawing are used to produce components</li><li>Setting up tools, offsets etc ready for your own operation to commence and assist Operators where appropriate</li><li>Ensuring Delivery Schedule Adherence of parts to system / route card dates</li><li>Responsible for ensuring work is completed on time in full to process routing / system date requirements</li></ul>Benefits:<ul><li>Hourly pay rate - Negotiable</li><li>Overtime (when available) paid at time and a half</li><li>Company Pension Scheme (salary sacrifice available)</li><li>25 days annual leave plus bank holidays</li><li>Employee Referral Programme</li><li>Healthcare Cash Plan and Life Assurance after 1 years’ service</li><li>Enhanced Family Friendly benefits</li><li>Cycle to Work Scheme</li><li>Employee Assistance Programme</li></ul>About You:<ul><li>Setting and operating CNC lathes using Fanuc controls and / or</li><li>Setting and operating 3/4/5 axis CNC milling machines using Heidenhain controls</li><li>Producing high complexity components from a range of materials</li><li>Adhering to quality standards</li><li>Good working knowledge of manufacturing techniques and Engineering drawings</li><li>Previous aerospace experience (Desirable)</li><li>Good working knowledge of component dimensions using various inspection equipment - including but not limited to Micrometers, Verniers and Plug Gauges.</li><li>Ability to produce components to drawing tolerance and specifications, efficiently and accurately as required by internal and external customer specification</li><li>DBS check will be required</li></ul>About Aeropeople:Whether you’re looking for your next job or searching out the next superstar to join your team…Aeropeople’s expertise and experience is entrenched in the aerospace, aviation, engineering, motorsport, automotive, and defence industries. We have the insight and know-how at both a local and international level to help bring people and businesses together, saving time and energy. Our capability is validated through our Engineering Services division encompassing Aircraft Line Maintenance services and Continuing Airworthiness Maintenance Organisation (CAMO), combined with our Aviation Training division offering technical training aircraft courses.During registration, please let us know where you are currently located or which locations you would consider taking a position in, required salary and notice period.For the latest news, events and jobs please search ‘Aeropeople Ltd’ on LinkedIn and Facebook for our latest jobs&nbsp;

Aeropeople Ltd

CNC Miller

Aeropeople urgently seeks aircraft-certified component mechanics for the wheel and brake shop in Italy.Contact details:<ul><li>Start as soon as possible&nbsp;</li><li>Permanent Contract&nbsp;</li><li>Good Pay Rates + relocation package&nbsp;</li></ul>Candidates must have:<ul><li>Proof of the right to work in Europe</li><li>Initials and in-date HF FT EWIS certificates</li><li>Minimum 2-year proof of experience as a component mechanic</li><li>To be able to issue the EASA A1 Form</li><li>Basic training diploma</li></ul>If you are interested, please apply, and we will contact successful candidates with more details.

Component Mechanic Italy

CAA Part 66 B1 Licensed Aircraft EngineersAeropeople has expanded its Line Maintenance Operation at London Stansted Airport.Ideal candidates will have type ratings/recency of at least 2 or 3 of the following aircraft:A320&nbsp; / CEO/NEO&nbsp;B737NG / CFM56B747-400 / CF6 and/or PW4000B777 / GE90The team also provide cover on the A330 aircraft occasionally.There are Permanent Positions as well as long-term contracts.Successful engineers MUST have CAA licences covering a minimum of two types on our line.Line maintenance experience preferred. Potential recency courses and engine courses are also available.Day / Night shift system offering good hours.UK market-leading salaries and benefits.You MUST have full rights to live/work in the UKPlease send a CV and a copy of your licence for a guaranteed reply.

B1 CAA Licensed Engineer Stansted, UK

NDT Technician Level 2 / ItalyAn exciting opportunity has arisen to join our client on a permanent bases in Italy at their wheel and brake shop as an NDT Level 2 Technician.Location: Italy Position: NDT Technician Level 2 Requirements: - Minimum 3 years of experience as an NDT Technician with NDT methods (UT, ET, MT, PT) - Strong problem-solving skills and attention to detail. - Excellent communication and teamwork abilities. - Right to work in Europe What We Offer: - Competitive salary - Company benefits - A supportive and innovative team environment. If this sounds like the role you've been waiting for, we invite you to apply today or contact Aeropeople for more information. Your next career move could be right here! &nbsp;

60 Technical and engineering Jobs